Caterpillar

D9 Dozer

رقم القطعة: CAT-104260

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

D9 Dozer

المواصفات

Engine ModelCat® C18
Bore145 mm
Stroke183 mm
Displacement18.1 l
Note (1)All engine ratings apply at 1,750 rpm.
Note (2)Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (3)Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Note (4)Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
Note*With oil filters.
Cooling System81.3 l
Engine Crankcase36 l
ModelD9
Product Pagehttps://www.cat.com/en_US/products/new/equipment/dozers/large-dozers/104260.html
Caterpillar CategoryLarge Dozers
Caterpillar Category PathProducts > Equipment > Dozers > Large Dozers > D9
Caterpillar Product Familyequipment
TypePlanetary powershift
Caterpillar Product Page ID104260
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20200807-2286c-65dc6
EmissionsU.S. EPA Tier 2 or Tier 3 equivalent
Operating Weight49988 kg
Pump TypePiston-type geared to flywheel
Weights — Note (1)D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Weights — Note (2)D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
Ground Clearance459 mm
Engine Power - ISO 14396357 kW
Maximum Digging Depth606 mm
Track Gauge2250 mm
Blade Height1934 mm
SoundThe average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. NOTE: The dynamic sound power level uncertainty is +/-2 dB(A).
Shipping Weight38271 kg
Length - Track on Ground3470 mm
Ground Contact Area4.23 m²
ROPSRollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPSFalling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Height - Top of Stack3876 mm
Weight1790 kg
Powertrain150 l
Maximum Tilt940 mm
Drum Width320 mm
Engine Power - Net SAE J1349/ISO 9249337 kW
Engine Power - Gross SAE J1995363 kW
Shoe TypeExtreme Service
Width - Shoe610 mm
Shoes/Side43
Grouser Height84 mm
Pitch240 mm
Track Rollers/Side8
Number of Carrier Rollers1 per side (optional)
Sound (1)The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. NOTE: The dynamic operator sound pressure level uncertainty is +/-2 dB(A).
Sound (2)Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
Steering TypeDifferential
Brake TypeSpring Applied Wet Disc
Brake Diameter393.7 mm
Brake Count8
Engine - U.S. EPA Tier 4 Final/EU Stage V — Engine Power - Gross SAE J1995356 kW
Engine - U.S. EPA Tier 4 Final/EU Stage V — Engine Power - ISO 14396349 kW
Engine - U.S. EPA Tier 4 Final/EU Stage V — Engine Power - Net SAE J1349/ISO 9249328 kW
Engine - U.S. EPA Tier 4 Final/EU Stage V — EmissionsU.S. EPA Tier 4 / EU Stage V
Engine - U.S. EPA Tier 4 Final/EU Stage V — Note (1)All Engine ratings apply at 1,750 rpm.
Engine - U.S. EPA Tier 4 Final/EU Stage V — Note (2)No derating required up to 2499 m (8,200 ft).
Fuel Tank (Splash Fill)963 l
DEF Tank (Tier 4 only)36 l
Fuel Tank (Fast Fill)939 l
Hydraulic Controls — Note (1)Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Final Drives (each)15 l
Fan Pump80 L/min
Roller Frames (each)45 l
Hydraulic Controls — Note (2)Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Pivot Shaft Oil30 l
Tilt Cylinder Flow - Rod End Flow200 L/min
Hydraulic System Tank89 l
Tilt Cylinder Flow - Head End Flow200 L/min
Lift Cylinder Relief Valve Setting26200 kPa
Pump Output - Steering363 L/min
Tilt Cylinder Relief Valve Setting19300 kPa
Ripper - Lift - Relief Valve Setting26200 kPa
Ripper - Pitch - Relief Valve Setting26200 kPa
Steering System - Pressure40500 kPa
Tank Capacity89 l
1.0 Forward3.5 km/h
2.0 Forward6.3 km/h
3.0 Forward11 km/h
1.0 Reverse4.4 km/h
2.0 Reverse7.8 km/h
3.0 Reverse13.6 km/h
Blade Capacity (SAE J1265)13.6 m³
Blade Width (over end bits)4350 mm
Ground Clearance at Full Lift1422 mm
Blade Weight4802 kg
Total Operating Weight* (with blade and single-shank ripper)49 988 kg
Blade - Semi-Universal — Note* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Blade - Universal — Blade Capacity (SAE J1265)16.6 m³
Blade - Universal — Blade Width (over end bits)4680 mm
Blade - Universal — Maximum Tilt1014 mm
Blade - Universal — Blade Weight5450 kg
Blade - Universal — Total Operating Weight* (with blade and single-shank ripper)50 513 kg
Blade - Universal — Note*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Maximum penetration force * (shank vertical)158 kN
Maximum penetration depth (standard tip)1231 mm
Pryout Force332 kN
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole882 mm
Number of Pockets1
Total Operating Weight* (with SU Blade and noted ripper)49 988 kg
Ripper - Single Shank — Note*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Single Shank, Deep Ripping — Maximum penetration force * (shank vertical)172 kN
Ripper - Single Shank, Deep Ripping — Maximum penetration depth (standard tip)1727 mm
Ripper - Single Shank, Deep Ripping — Pryout Force331 kN
Ripper - Single Shank, Deep Ripping — Weight4981 kg
Ripper - Single Shank, Deep Ripping — Note*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Width - Over Trunnions3310 mm
Height - FOPS Cab*3820 mm
Height - ROPS/Canopy*4000 mm
Dimensions (Approximate) — Note (1)*Includes grouser height for total dimensions on hard surfaces.
Overall Length - Basic Tractor4910 mm
Length - With SU-Blade6601 mm
Length - With U-Blade6967 mm
Length - With Single-Shank Ripper6529 mm
Length - With Multi-Shank Ripper6538 mm
Overall Length - SU-Blade/SS Ripper8219 mm
Maximum Penetration Force - Shank Vertical154 kN
Maximum Penetration - Standard Tip798 mm
Pry-Out Force - Multi-Shank Ripper with One Tooth361 kN
Ripper - Single Shank, Deep Ripping — Maximum Clearance Raised - Under Tip, Pinned in~b324c6817 mm
Ripper - Single Shank, Deep Ripping — Total Operating Weight* (with SU Blade and noted~b9110850 115 kg
Ripper - Multi-Shank, Adjustable Parallelogram — Maximum Clearance Raised - Under Ti~8d8e8b879 mm
Ripper - Multi-Shank, Adjustable Parallelogram — Number of Pockets3
Ripper - Multi-Shank, Adjustable Parallelogram — Weight5550 kg
Total Operating Weight* - With SU-Blade and Ripper50684 kg
Ripper - Multi-Shank, Adjustable Parallelogram — Note* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Width - Without Trunnions - Standard Shoe2870 mm
Drawbar Height (Center of Clevis)*763 mm
Length - Basic Tractor - With Drawbar5242 mm
Length - Basic Tractor - With Winch5545 mm
Winch ModelPA 140VS
Oil Capacity15 l
Wire Cable Diameter - Recommended28 mm
Wire Cable Diameter - Optional32 mm
Maximum Drum Capacity - Recommended Cable Length78 m
Maximum Drum Capacity - Optional Cable Length62 m
Wire Cable Ferrule Size - Outside Diameter60 mm
Wire Cable Ferrule Size - Length70 mm
Winches — Note*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Winches — Note (2)Variable speed, hydraulically driven, dual braking system, three-roller fairlead.

منتجات مشابهة

معدات ثقيلة وآليات