NZ2GNCE3-32DT - DC input: 16 points, 24 V DC, 6.6 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms, 16…

Mitsubishi Electric

NZ2GNCE3-32DT - DC input: 16 points, 24 V DC, 6.6 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms, 16…

رقم القطعة: NZ2GNCE3-32DT_3677

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

NZ2GNCE3-32DT - DC input: 16 points, 24 V DC, 6.6 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms, 16…

المواصفات

Basic information / Model nameNZ2GNCE3-32DT
Basic information / OverviewDC input: 16 points, 24 V DC, 6.6 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms, 16 points/common, positive common, transistor output: 16 points, 24 V DC, 0.5 A/point, 4 A/common, response time: 0.8 ms, 16 points/common, sink type, 3-wire, sensor connector (e-CON) type
Basic information / Sales statusOn sale
Listed / SeriesRemote I/O
Listed / Model nameNZ2GNCE3-32DT
Weight0.25 kg
Basic information / Conformance standardUL cUL CE(EMC) CE(RoHS) KC(EMC) LR NK DNV ABS
Operating atmosphereNo corrosive gases, flammable gases, less conductive dust
Operating altitude0...2000 m
Installation locationInside a control panel
Overvoltage categoryII or less
Pollution degree2 or less
Insulation resistanceBetween all DC external terminals and ground: 10 MΩ or higher by 500 V DC insulation resistance tester
Operating ambient temperature0...55 ˚C
Storage ambient temperature-25...75 ˚C
Operating ambient humidity5...95 %RH, non-condensing
Storage ambient humidity5...95 %RH, non-condensing
Network topologyLine topology, star topology (Coexistence of line topology and star topology is possible.), and ring topology
Vibration resistance / IEC 61131-2: 2007/JIS B 3502: 2011 / Under intermittent vibrationFrequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s2 Sweep count: 10 times each in X, Y, and Z directions
Vibration resistance / IEC 61131-2: 2007/JIS B 3502: 2011 / Under continuous vibrationFrequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s2
Shock resistance / IEC 61131-2: 2007/JIS B 3502: 2011Three shocks in each direction per axis, on 3 mutually perpendicular axes (total of 18 shocks)
Listed / OutlineDC input: 16 points, 24 V DC, 6.6 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms, 16 points/common, positive common, transistor output: 16 points, 24 V DC, 0.5 A/point, 4 A/common, response time: 0.8 ms, 16 points/common, sink type, 3-wire, sensor connector (e-CON) type
Input typeDC input (positive common type)
Output typeTransistor output (sink type)
Dielectric withstand voltageBetween all DC external terminals and ground: 510 V AC for 1 minute
External dimensions / Height54.5 mm
External dimensions / Width200 mm
External dimensions / Depth46 mm
Transmission specifications / Data transmission speed1 Gbps/100 Mbps
Transmission specifications / Communication mode1000BASE-T: Full-duplex 100BASE-TX: Full-duplex
Equipment classClass I
Listed / Large categoriesI/O
Listed / Medium categoriesI/O
External interfaceCommunication part: RJ45 connector Module power supply part: One-touch connector plug for power supply and FG I/O part: Sensor connector (e-CON)
CC-Link IE TSN ClassCC-Link IE TSN Class B CC-Link IE TSN Class A
Multicast filterAvailable
Transmission specifications / InterfaceRJ45 (AUTO MDI/MDI-X)
Transmission specifications / Maximum frame size1518 bytes
Transmission specifications / Maximum segment length100 m
Transmission specifications / Number of cascaded connectionsConsult the manufacturer of the switching hub used.
Transmission specifications / IP versionIPv4
Number of input points16 points
Rated input voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Rated input current6.6 mA TYP. (24 V DC)
Maximum number of simultaneous input points100 %
Station typeCC-Link IE TSN Communication Mode: Remote station CC-Link IE Field Network Communication Mode: Intelligent device station
ON voltage/ON current11 V DC or more/4 mA or more
OFF voltage/OFF current5 V DC or less/1.5 mA or less
Input resistance3.3 kΩ
Input response time / OFF to ON0 ms, 0.2 ms, 1 ms, 1.5 ms, 5 ms, 10 ms, 20 ms, 70 ms
Input response time / ON to OFF0 ms, 0.2 ms, 1 ms, 1.5 ms, 5 ms, 10 ms, 20 ms, 70 ms
Input common terminal arrangement16 points/common (3-wire, sensor connector (e-CON) type)
Protection degreeIP2X
CC-Link IE TSN protocol version / CC-Link IE TSN Class BProtocol version 2.0/1.0
CC-Link IE TSN protocol version / CC-Link IE TSN Class AProtocol version 2.0
Maximum response time for time-managed polling / CC-Link IE TSN Class A512 µs
Cyclic transmission / RX/RY points32 points
Cyclic transmission / RWr/RWw points4 points
Module power supply / Voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Module power supply / Current110 mA or less (at 24 V DC, all points ON)
Listed / Small categoriesDC input/transistor output (sink)
Number of output points16 points
Rated load voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Maximum load current0.5 A/point, 4 A/common
Maximum inrush currentCurrent is limited by the overload protection function.
Leakage current at OFF0.1 mA or less
Maximum voltage drop at ON0.3 V DC (TYP.) 0.5 A, 0.6 V DC (MAX.) 0.5 A
Output response time / OFF to ON0.1 ms or less
Output response time / ON to OFF0.8 ms or less (resistive load)
Surge suppressorZener diode
Protection function / Overheat protection functionActivated in increments of 1 point.
Protection function / Overload protection functionLimit current with overload protection at overcurrent detection: 1.5...3.5 A/point Activated in increments of 1 point.
External power supply for output part / Voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
External power supply for output part / Current25 mA or less (TYP. 24 V DC/common), excluding external load current
Output common terminal arrangement16 points/common (3-wire, sensor connector (e-CON) type)

منتجات مشابهة

الشبكات الصناعية والأمن السيبراني