NZ2GN12A42-16DTE - DC input: 8 points, 24 V DC, 7.3 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms,…
رقم القطعة: NZ2GN12A42-16DTE_3679
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: NZ2GN12A42-16DTE_3679
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
NZ2GN12A42-16DTE - DC input: 8 points, 24 V DC, 7.3 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms,…
| Basic information / Model name | NZ2GN12A42-16DTE |
|---|---|
| Basic information / Overview | DC input: 8 points, 24 V DC, 7.3 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms, 8 points/common, negative common, 2...4-wire transistor output: 8 points, 12/24 V DC, 4 A/point (Y8...YB), 2 A/point (YC...YF), 12 A/common, response time: 1.0 ms, 8 points/common, source type, 2-wire, waterproof connector type |
| Basic information / Sales status | On sale |
| Listed / Series | Remote I/O |
| Listed / Model name | NZ2GN12A42-16DTE |
| Weight | 0.42 kg |
| Basic information / Conformance standard | UL cUL CE(EMC) CE(RoHS) KC(EMC) |
| Operating atmosphere | No corrosive gases, flammable gases, less conductive dust |
| Operating altitude | 0...2000 m |
| Installation location | Inside a control panel |
| Overvoltage category | II or less |
| Pollution degree | 2 or less |
| Insulation resistance | Between all DC external terminals and ground: 10 MΩ or higher by 500 V DC insulation resistance tester |
| Operating ambient temperature | 0...55 ˚C |
| Storage ambient temperature | -25...75 ˚C |
| Operating ambient humidity | Compliant with IP67 |
| Storage ambient humidity | 5...95 %RH, non-condensing |
| Network topology | Line topology, star topology (Coexistence of line topology and star topology is possible.), and ring topology |
| Vibration resistance / IEC 61131-2: 2007/JIS B 3502: 2011 / Under intermittent vibration | Frequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s2 Sweep count: 10 times each in X, Y, and Z directions |
| Vibration resistance / IEC 61131-2: 2007/JIS B 3502: 2011 / Under continuous vibration | Frequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s2 |
| Shock resistance / IEC 61131-2: 2007/JIS B 3502: 2011 | Three shocks in each direction per axis, on 3 mutually perpendicular axes (total of 18 shocks) |
| Listed / Outline | DC input: 8 points, 24 V DC, 7.3 mA, response time: 0/0.2/1/1.5/5/10/20/70 ms, 8 points/common, negative common, 2...4-wire transistor output: 8 points, 12/24 V DC, 4 A/point (Y8...YB), 2 A/point (YC...YF), 12 A/common, response time: 1.0 ms, 8 points/common, source type, 2-wire, waterproof connector type |
| Input type | DC input (negative common type) |
| Output type | Transistor output (source type) |
| Dielectric withstand voltage | Between all DC external terminals and ground: 720 V AC for 1 minute |
| External dimensions / Height | 238 mm |
| External dimensions / Width | 63 mm |
| External dimensions / Depth | 37.5 mm |
| Transmission specifications / Data transmission speed | 1 Gbps/100 Mbps |
| Transmission specifications / Communication mode | 1000BASE-T: Full-duplex 100BASE-TX: Full-duplex |
| Equipment class | Class I |
| Listed / Large categories | I/O |
| Listed / Medium categories | I/O |
| External interface | Communication part: M12 waterproof connector, 8 pins, female, X-code Module power supply part: M12 waterproof connector, 5 pins, male, female, L-code I/O part: M12 waterproof connector, 5 pins, female, A-code |
| CC-Link IE TSN Class | CC-Link IE TSN Class B CC-Link IE TSN Class A |
| Multicast filter | Available |
| Transmission specifications / Interface | M12 waterproof connector (AUTO MDI/MDI-X) |
| Transmission specifications / Maximum frame size | 1518 bytes |
| Transmission specifications / Maximum segment length | 100 m |
| Transmission specifications / Number of cascaded connections | Consult the manufacturer of the switching hub used. |
| Transmission specifications / IP version | IPv4 |
| Number of input points | 8 points |
| Rated input voltage | 24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC) |
| Rated input current | 7.3 mA TYP. (24 V DC) |
| Maximum number of simultaneous input points | 100 % |
| Station type | CC-Link IE TSN Communication Mode: Remote station CC-Link IE Field Network Communication Mode: Remote device station |
| ON voltage/ON current | 11 V DC or more/4 mA or more |
| OFF voltage/OFF current | 5 V DC or less/1.5 mA or less |
| Input resistance | 3.0 kΩ |
| Input response time / OFF to ON | 0 ms, 0.2 ms, 1 ms, 1.5 ms, 5 ms, 10 ms, 20 ms, 70 ms |
| Input response time / ON to OFF | 0 ms, 0.2 ms, 1 ms, 1.5 ms, 5 ms, 10 ms, 20 ms, 70 ms |
| Input common terminal arrangement | 8 points/common (2- to 4-wire, waterproof connector type) |
| Protection degree | IP67 |
| CC-Link IE TSN protocol version / CC-Link IE TSN Class B | Protocol version 2.0/1.0 |
| CC-Link IE TSN protocol version / CC-Link IE TSN Class A | Protocol version 2.0 |
| Maximum response time for time-managed polling / CC-Link IE TSN Class A | 512 µs |
| Cyclic transmission / RX/RY points | 16 points |
| Cyclic transmission / RWr/RWw points | 4 points |
| Module power supply / Voltage | 24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC) |
| Module power supply / Current | 160 mA or less (at 24 V DC, all points ON) |
| Listed / Small categories | DC input/transistor output (source) |
| Number of output points | 8 points |
| Rated load voltage | 12/24 V DC (ripple ratio: within 5 %) (allowable voltage range: 10.2...28.8 V DC) |
| Maximum load current | 4 A/point (Y8 to YB), 2 A/point (YC to YF), 12 A/common |
| Maximum inrush current | Current is limited by the overload protection function. |
| Leakage current at OFF | 0.1 mA or less |
| Maximum voltage drop at ON | 0.3 V DC (TYP.) 2 A, 0.6 V DC (MAX.) 2 A, 0.6 V DC (TYP.) 4 A, 1.2 V DC (MAX.) 4 A |
| Output response time / OFF to ON | 0.5 ms or less |
| Output response time / ON to OFF | 1.0 ms or less (resistive load) |
| Surge suppressor | Zener diode |
| Protection function / Overheat protection function | Activated in increments of 1 point. |
| Protection function / Overload protection function | Limit current with overload protection at overcurrent detection: 5.2 A or more/point Activated in increments of 1 point. |
| External power supply for output part / Voltage | 12/24 V DC (ripple ratio: within 5 %) (allowable voltage range: 10.2...28.8 V DC) |
| External power supply for output part / Current | 30 mA or less (TYP. 24 V DC/common), excluding external load current |
| Output common terminal arrangement | 8 points/common (2-wire, waterproof connector type) |
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر