RV-7FRL-Q-SH02 - Vertical FR series 7kg, Long arm, Internal wiring specifications (Gripper input,…

Mitsubishi Electric

RV-7FRL-Q-SH02 - Vertical FR series 7kg, Long arm, Internal wiring specifications (Gripper input,…

رقم القطعة: RV-7FRL-Q-SH02_2

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

RV-7FRL-Q-SH02 - Vertical FR series 7kg, Long arm, Internal wiring specifications (Gripper input,…

المواصفات

SeriesRV-FR series
Basic information / Model nameRV-7FRL-Q-SH02
Basic information / OverviewVertical FR series 7kg, Long arm, Internal wiring specifications (Gripper input, Vision sensor, Force sensor or Electric gripper), Standard specification, MELSEC Q series-dedicated
Basic information / Sales statusOn sale
Listed / SeriesRV-FR series
Listed / Model nameRV-7FRL-Q-SH02
InstallationFloor type, ceiling type, (wall-mounted type) (*1)
CategoryRobot arm
TypeRV-7FRL-Q-SH02
Protection degreeIP40
StructureVertical articulated
Environmental specificationsStandard
Degrees of freedom6
Drive systemAC servo motor (All axes have the brake)
Position detection methodAbsolute encoder
Load capacity / Maximum / kg7 (*2)
Load capacity / Rated / kg7
Maximum reach radius / mm907.7
Arm length / Upper arm / mm435
Arm length / Fore arm / mm470
Operating range / J1 / deg-240 to ＋240
Operating range / J2 / deg-110 to ＋130
Operating range / J3 / deg-0 to 162
Operating range / J4 / deg-200 to ＋200
Operating range / J5 / deg-120 to ＋120
Operating range / J6 / deg-200 to ＋200 (*3)
Maximum speed / J1 / deg/sec288
Maximum speed / J2 / deg/sec321
Maximum speed / J3 / deg/sec360
Maximum speed / J4 / deg/sec337
Maximum speed / J5 / deg/sec450
Maximum speed / J6 / deg/sec720
Position repeatability / mm±0.02
Ambient temperature / ℃0 to 40
Mass / kg68
Tolerable moment / J4 / Nm16.2
Tolerable moment / J5 / Nm16.2
Tool wiringGripper: 8 input points/8 output points Signal cable for the multi-function gripper and sensors LAN × 1 〈100BASE-TX〉 (*6)
Tolerable moment / J6 / Nm6.86
Tolerable amount of inertia / J4 / kgm20.45
Tool pneumatic pipesPrimary: ø6 × 2 Secondary: φ4 × 4(forearm section), φ4 × 4 (passes through in the wrist.) (*7)
Tolerable amount of inertia / J5 / kgm20.45
Machine cable5m (connector on both ends)
Tolerable amount of inertia / J6 / kgm20.10
Connected controller TypeCR800-07VQ
Control TypeMELSEC Q compatible
Listed / Load capacity Maximum [kg]7 (*2)
Listed / Maximum reach radius [mm]907.7
Listed / Environmental specificationsStandard
Listed / Control TypeMELSEC Q compatible
Maximum composite speed / mm/sec11700 (*4)
Cycle time / sec0.36 (*5)
Mounting cable specifications / Air ø4ー
Mounting cable specifications / Gripper input 8 points○
Mounting cable specifications / Vision sensor○
Mounting cable specifications / Force sensor○ (may be used for either force sensor or electric gripper)
Mounting cable specifications / Electric gripper○ (may be used for either force sensor or electric gripper)

منتجات مشابهة

الأتمتة الصناعية و التحكم