C164
رقم القطعة: KOMATSU-C164
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
C164
المواصفات
| Weight (kg) | 1672.5 |
|---|---|
| Weight (lbs) | 3687 |
| Maximum cutting diameter (in) | 32.7 |
| Maximum cutting diameter (mm) | 830 |
| Maximum delimbing diameter (in) | 24.4 |
| Maximum delimbing diameter (mm) | 620 |
| Fell/Cut diam. theor. max (in) | 32.7 (with 97 cm saw bar) |
| Fell/Cut diam. theor. max (mm) | 830 (with 97 cm saw bar) |
| Max width (in) | 70.7 |
| Max width (mm) | 1 795 |
| Height including rotator (mm) | 1 770 |
| Height including rotator (in) | 69.7 |
| Roller opening, max (in) | 29.5 |
| Height to vertical knife (mm) | 1 600 |
| Roller opening, max (mm) | 750 |
| Height to vertical knife (in) | 63 |
| Opening knives, lower (in) | 31.5 |
| Opening knives, lower (mm) | 800 |
| Opening knives, upper (in) | 26 |
| Opening knives, upper (mm) | 660 |
| Weight (lbs) (Specifications) | Dry weight, incl. rotator, from 3,109 |
| Weight (kg) (Specifications) | Dry weight, incl. rotator, from 1 400 |
| Feed speed (m/s) | 0 - 5 |
| Feed speed (ft/s) | 0 - 16.4 |
| Gross feed force (kN) | 29.6 |
| Gross feed force (lbf) | 6,654 |
| Delimbing knives, number | 5 |
| Saw motor (in^3/rev) | 1.16 |
| Saw motor (cm^3/rev) | 19 |
| Maximum opening width, tip to tip (in) | 20.7 |
| Max hydraulic flow (L/min) | 320 |
| Maximum opening width, tip to tip (mm) | 526 |
| Max hydraulic flow (gpm) | 84.5 |
| Max hydraulic pressure (psi) | 4,061 |
| Max hydraulic pressure (MPa) | 28 |
| Feed wheel type | Steel rollers |
| Delimbing knives, opening (mm) | 525 |
| Delimbing knives, opening (in) | 20.7 |
| Bar (option)(in) | 32.5 |
| Bar (option)(cm) | 82.5 |
| Notes | Standard and extra equipment are market-dependent and vary between countries. The specification describes possible equipment, not that which is standard or optional. Stated weights are based on standard equipment. Specifications and designs are subject to change without notice. |
