931XC-3
رقم القطعة: KOMATSU-931XC-3
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
931XC-3
المواصفات
| Horsepower (HP) | 255 net HP @ 1,850 rpm |
|---|---|
| Ground clearance (mm) | 705 |
| Fuel tank (US gal) | 127 |
| Fuel tank (L) | 480 |
| Weight (kg) | From 21 900 |
| Weight (lbs) | From 48,281 |
| Voltage | 24 V |
| Tractive force (kN) | 200 |
| Tractive force (lbf) | 44,962 |
| Driving speed (kph) | 0 - approximately 20 |
| Driving speed (mph) | 0 - approximately 12.5 |
| Stroke volume (L) | 7.4 |
| Torque (Nm) | 1,130 Nm at 1,500 rpm |
| Torque (ft-lbs) | 833 ft.-lbs. at 1,500 rpm |
| Type, Europe and North America | 74 AWF, 6-cylinder diesel engine with turbo and intercooler. EPA Tier 4 Final and EU Stage 4. |
| Stroke volume (US gal) | 1.95 |
| Flow (L) | 528 at 1 600 rpm |
| Flow (US gal) | 139 at 1,600 rpm |
| Approximate weight (kg) | From 21 900 |
| System pressure (psi) | 4,061 |
| Approximate weight (lbs) | From 48,281 |
| System pressure (bar) | 280 |
| Width (mm) | 2 776 |
| Width (ft) | 9 ft. 1 in |
| Note on dimensions | Stated dimensions are nominal and may vary slightly depending on production tolerances and choice of equipment. |
| Battery capacity | 2 x 180 Ah |
| Gross slewing torque (lbf-ft) | 39,828 |
| Gross lifting torque (lbf-ft) | 16,964 |
| Generator | 2 x 100 A |
| Length total (ft) | 26 ft. 4 in |
| Length total (mm) | 8 015 |
| Length front axle to middle joint (ft) | 6 ft. 4 in |
| Length front axle to middle joint (mm) | 1 930 |
| Length middle joint to rear axle (mm) | 2 150 |
| Length middle joint to rear axle (ft) | 7 ft. 1 in |
| Notes | The specifications describe possible equipment, not which equipment is standard or optional. Standard and optional equipment varies between countries. Your sales representative has an up-to-date list of what is included. Weights are based on the equipment specified in the basic specification. Specifications and designs are subject to alteration without prior notice. |
| Horsepower (kW DIN) | 190 kW DIN @ 1 850 rpm |
| Gross lifting torque (Nm) | 230 |
| Model and reach (ft) | 28 ft. 7 in, 32 ft. 10 in or 36 ft. |
| Model and reach (m) | 8.71 m, 10.01 m or 10.97 m |
| Gross slewing torque (Nm) | 54 |
| Transport height with tire compression (mm) | 3 945 |
| Transport height with tire compression (ft) | 12 ft. 11 in |
| Ground clearance (ft) | 2 ft. 4 in |
| Power_metric | 190 kW DIN @ 1 850 rpm |
| Available heads | S92, C93, C123, S132, C144 |
| Power_imperial | 255 net HP @ 1,850 rpm |
