Komatsu

HM460-6

رقم القطعة: KOMATSU-HM460-6

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

HM460-6

المواصفات

Maximum torque (ft-lbs)2,067
Operating weight (kg)74 900
Operating weight (lbs)165,126
Engine modelKomatsu DBA127
AspirationTwo stage turbocharged, aftercooled
Number of cylinders6
Piston displacement (L)12.74
Piston displacement (in^3)3.36
SAEJ1995 - Gross (kW)386
SAEJ1995 - Gross (HP)518
ISO 9249 / SAE J1349 - Net (HP)516
ISO 9249 / SAE J1349 - Gross (kW)385
Rated rpm1700
Fan drive typeHydraulic and electric
FilterFull-flow type
MethodGear pump, force-lubrication
Fuel tank (US gal)127
Fuel tank (L)482
Engine oil (L)49
Engine oil (US gal)12.9
Final drive (US gal)9.5
Final drive (L)35.8
Bore (mm)130
Bore (in)5.12
Stroke (in)6.30
Stroke (mm)160
Hydraulic system (US gal)36.7
Hydraulic system (L)138.8
Service brakeFull-hydraulic control, oil-cooled multiple-disc type on front and center axles
DEF tank (US gal)22.2
DEF tank (L)84
Air cleanerDry double elements with pre-cleaner, plus dust indicator
Maximum travel speed (kph)53.3
Maximum travel speed (mph)33.24
Engine typeWater-cooled, 4-cycle
Cooling system (gal)23.2
Cooling system (L)88
TransmissionFull-automatic, planetary gear type
Gross vehicle weight (kg)74,900
Gross vehicle weight (lbs)165,126
Gross horsepower (HP)518 @ 1,700 rpm
Gross horsepower (kW)386 @ 1,700 rpm
Capacity (mt)42
Capacity (st)46.3
Bottom (in)0.55
Bottom (mm)14
Front (in)0.28
Front (mm)7
Sides (in)0.43
Sides (mm)11
Target area (ft x in)18.91 ' x 10.48'
Target area (mm x mm)5,767 x 3,194
HeatingExhauste heating (optional)
Struck 16.9 capacity (yd^3)24.7
Struck 16.9 Capacity (m^3)18.9
Heaped 2:1 SAE Capacity (yd^3)33.6
Heaped 2:1 SAE Capacity (m^3)25.7
Payload (US tons)46.3
Payload (metric tons)42
Maximum torque (kg-m)2803
Front suspension typeHydro-pneumatic suspension
Rear suspension typeCombined hydro-pneumatic and rubber suspension system
Hoist cylinder typeTwin, telescopic type
Relief pressure (kg/cm^2 / MPa)290 / 28.4
Relief pressure (psi)4125
Hoist time12
Torque converter3-elements, 1-stage, 2-phase
Speed range9 speeds forward and 2 reverse
Lockup clutchWet, multi-disk clutch
Shift controlElectronic shift control with automatic clutch modulation in all gear
Brakes standardISO 3450
Final drive typePlanetary gear
Differential ratio3.063
Planetary ratio6
Steering system typeArticulated type, fully hydraulic power steering with two double-acting cylinders
StandardISO 3449 (FOPS), ISO 3471 (ROPS)
Articulation angle (degrees)45 in each direction
Secondary steeringAutomatically actuated, electrically powered
Minimum turning radius wall to wall (ft)29 and 4 inches
Minimum turning radius wall to wall (m)8.95
Empty weight (lbs)72533
Empty weight (kg)32900
Front axle - loaded (%)30.4
Center axle - loaded (%)36
Rear axles - loaded (%)33.6
Front axle - empty (%)59.2
Center axle - empty (%)21.7
Rear axles - empty (%)19.1
Torque converter transmission retarder (L)89.4
Torque converter transmission retarder (US gal)23.6
Differentials (L)116.2
Differentials (US gal)30.7
Suspension (US gal)5.65
Suspension (L)21.4
Standard tire29.5 R25

منتجات مشابهة

معدات ثقيلة وآليات