TS-SH
رقم القطعة: YAMAHA-ROB-TS-SH
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
01 Long-awaited model applicable to the absolute is released in the robot positioners dedicated to the TRANSERVO Series. Easy positioning operation can be performed only by specifying a point number and inputting the start command. As the absolute specifications are selected, no return-to-origin is needed. This reduces a period of time until the equipment starts after turning on the power. 02 Available for all TRANSERVO series models. 03 Main operation patterns 04 Detailed data can be set for each point Settings such as acceleration, deceleration, zone output range, and position margin zone can be set for each point. Different operations can be easily specified by combining these settings with the above operation patterns. 05 Maximum acceleration auto setting Acceleration is a critical parameter that determines how long the robot can continue operating (or service life). In worst cases, setting the acceleration too high may cause the robot to breakdown after a short time. On the TS series, the maximum acceleration is finely set by taking into account the service life span of the motor output and the guide for each robot model and payload. This eliminates any worry about setting the acceleration too high by mistake. 06 Applicable to EtherNet/IP. Select from the following I/O types to match the host controller specifications. All hardware is built into the positioner unit so cabling and wire hookups are easy. 07 Up to 16 controllers can be connected. (Daisy chain function) As the TS series controllers are connected through the daisy chain, the data designing or monitoring of a desired controller can be made through one personal computer or handy terminal. Since the daisy chain is applicable to not only "TS-S2" and "TS-SD" dedicated to the TRANSERVO, but also "TS-X" and "TS-P" applicable to higher-grade models, it can be connected to all YAMAHA single axis robots. This is very convenient when many more robots are used. 08 Support software common to the TS series "TS-Ma