6-Inch Encapsulated MagForce High Efficiency Motor 6R1-PM-25.3-460-120-W-US-Lead

6-Inch Encapsulated MagForce High Efficiency Motor 6R1-PM-25.3-460-120-W-US-Lead

Name: 6-Inch Encapsulated MagForce High Efficiency Motor 6R1-PM-25.3-460-120-W-US-Lead
Brand: Franklin Electric
SKU: franklin-electric-2360849566e

رقم القطعة: franklin-electric-2360849566e

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The 6-inch permanent magnet motor is engineered for high performance, simple startup and incredible long-term cost savings. Based on field trial data, owners and operators benefit from electrical cost savings as a result of 90% efficiency rating in the motor for an investment payback of less than two years in typical duty rate applications. Each MagForce High Efficiency System is powered with a permanent magnet motor that operates at a fraction of the energy consumption when compared to traditional induction systems. Plus, each 6-inch permanent magnet motor is paired with an innovative Franklin Electric engineered drive for intuitive startup and reliable protection for submersible pumping applications. Features and benefits: - GROUNDBREAKING EFFICIENCY: Powered by MagForce High Efficiency Motor with up to 92% efficiency rating that is 8-12 points (15%) greater than standard induction motor construction. Typical duty rate systems can have a payback of 1 to 2 years. - SLASH ELECTRICITY CONSUMPTION: Up to 14% energy savings compared to traditional induction motors. - SIMPLIFIED INVENTORY MANAGEMENT: Available motor options cover a wide range of pump horsepower needs (up to 60 hp) with fewer SKUs to manage. - SMALLER FOOTPRINT: Lighter and easier to handle than standard induction motors. - INTUITIVE STARTUP: When optimized and paired with a Franklin Electric variable frequency drive, expect easy startups and reliable protection for any project. - BUILT TOGETHER TO WORK TOGETHER: Rely on components from a single trusted source for the ultimate in operational compatibility and optimized operation. - FULLY SUPPORTED: Comes fully supported by the industry’s leading Technical Support professionals and Field Service Engineers. - Field trial data - Groundwater remediation - Drainage water level control - Municipal/Utility water supply - Construction site dewatering - High volume and industrial livestock operations - Mine site dewatering and tank level control - Well supply geothermal HVAC systems - Sand Fighter models are equipped with Franklin’s robust Sand Fighter sealing system for durability against sand or other abrasives. - Max 3600 rpm (4-pole, 120 Hz); Nominal 3450 rpm (4 pole, 115 Hz) Maximum temperature winding wire NEMA class 200 - Hermetically sealed windings - 6” double flange NEMA mounting design - Field replaceable, factory installed over-molded lead for cable resilience: 13 ft - Stainless steel shell - Sand slinger - Kingsbury-type, water-lubricated, thrust bearing: - 7.5-30HP – 3,500 lb - >40HP – 6,000 lb - Pressure-equalizing diaphragm, spring pre-loaded - Nominal ambient temperature: 86°F (30°C) - Cooling flow: - 7.5-30HP - 0.5 ft/s - >40HP - 1.6 ft/s - Max. storage temperature: 5°F to 140°F - System Supply Voltage: 460 V (120 Hz) - Voltage Tolerance: ± 10 % UN - Motor ingress protection IP68 and insulation class F - NSF/ANSI 61 Certified - Rotation counterclockwise facing shaft end (rotation reversible) - Motors installation orientation: Vertical/horizontal (shaft end heightened)

المواصفات

Frequency	120 Hz
Phases	Three-Phase
Amps - Full Load	35.3 A
Amps - Service Factor	41 A
Volts	460 VAC
Voltage Tolerance (%)	-10.0% / +10.0%
Wire	3-Wire
Thrust Bearing Rating	3500 lb
Lead Length	13 ft
Motor	Encapsulated
Continuous Duty	Yes
Efficiency Service Factor Load [%]	91.70 %
Protection [IP]	IP68
Hz	120 Hz
Lead Wire Size	AWG #10
Lead Retainer Method	Lead Jam Nut
Poles	4
S.F.	1.15
Motor NEMA Frame Type	6"
Motor Cooling	Water
Motor Ambient Temperature Rating Nominal	86 °F
Rotation	Counter clockwise facing the shaft
Winding Resistance (Main Winding)	0.33
Thrust Bearing	Kingsbury Type
Seal	Mechanical Seal
Lead Insulation Material	EPR
Diaphragm Material	Ethylene-Propylene-Diene (EPDM)
Motor Fill Solution (Water Soluble / Non Toxic)	Yes
Shaft Slinger Material	Nitrile Rubber (NBR)
Stator/ Motor Shell Material	304 SS
Winding Material	Copper
Motor Length	31.24 "
Product Weight	127 lb
Product Weight with Pack	134 lb
Carton Length	42.13 "
Carton Width	6.1 "
Carton Height	8.35 "
Shaft End	Spline
Minimum Order Quantity	1
Drinking Water Agency Approvals	ANSI/NSF Standard 61
Electrical Agency Approvals	UL
Warranty Standard Time	12 Month Install / 24 Month Manufacturing
Repair Kit Available	Yes
Item #	2360849566E
Model	6R1-PM-25.3-460-120-W-US-Lead
Series	6-Inch MagForce Three Phase Permanent Magnet Models
Product family	6-Inch Encapsulated MagForce High Efficiency Motor
SubTrol Heat Sensor	No
HP 120Hz	20-30 hp
Motor Diameter - Physical Diameter	5.44"
Motor Insulation Classification	F
Motor Shaft End - Material	Stainless Steel 1.4462
Motor Fill Solution	FES91
Shaft Diameter	1 "
Maximum Immersion Depth	1148.29 ft
Service Factor - 120Hz	1.15
VFD Required	YES
Minimum Cooling Flow	.50 ft/sec
Motor Adapter	Double flange
Motor Bottom End Bell Material	Cast Iron with E-Coat Paint
Motor Top End Bell Material	Cast Iron with E-Coat Paint
Stator Ends Material	Carbon Steel
Stator Fill	Resin
Type	Sand Fighter
Motor Connection	DOL
Maximum Starts in a 1 Hour Period	20