6-Inch Encapsulated MagForce High Efficiency Motor 6R1-PM-51.7-460-120-W-US-LEAD

6-Inch Encapsulated MagForce High Efficiency Motor 6R1-PM-51.7-460-120-W-US-LEAD

Name: 6-Inch Encapsulated MagForce High Efficiency Motor 6R1-PM-51.7-460-120-W-US-LEAD
Brand: Franklin Electric
SKU: franklin-electric-2360869566e

رقم القطعة: franklin-electric-2360869566e

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The 6-inch permanent magnet motor is engineered for high performance, simple startup and incredible long-term cost savings. Based on field trial data, owners and operators benefit from electrical cost savings as a result of 90% efficiency rating in the motor for an investment payback of less than two years in typical duty rate applications. Each MagForce High Efficiency System is powered with a permanent magnet motor that operates at a fraction of the energy consumption when compared to traditional induction systems. Plus, each 6-inch permanent magnet motor is paired with an innovative Franklin Electric engineered drive for intuitive startup and reliable protection for submersible pumping applications. Features and benefits: - GROUNDBREAKING EFFICIENCY: Powered by MagForce High Efficiency Motor with up to 92% efficiency rating that is 8-12 points (15%) greater than standard induction motor construction. Typical duty rate systems can have a payback of 1 to 2 years. - SLASH ELECTRICITY CONSUMPTION: Up to 14% energy savings compared to traditional induction motors. - SIMPLIFIED INVENTORY MANAGEMENT: Available motor options cover a wide range of pump horsepower needs (up to 60 hp) with fewer SKUs to manage. - SMALLER FOOTPRINT: Lighter and easier to handle than standard induction motors. - INTUITIVE STARTUP: When optimized and paired with a Franklin Electric variable frequency drive, expect easy startups and reliable protection for any project. - BUILT TOGETHER TO WORK TOGETHER: Rely on components from a single trusted source for the ultimate in operational compatibility and optimized operation. - FULLY SUPPORTED: Comes fully supported by the industry’s leading Technical Support professionals and Field Service Engineers. - Field trial data - Groundwater remediation - Drainage water level control - Municipal/Utility water supply - Construction site dewatering - High volume and industrial livestock operations - Mine site dewatering and tank level control - Well supply geothermal HVAC systems - Sand Fighter models are equipped with Franklin’s robust Sand Fighter sealing system for durability against sand or other abrasives. - Max 3600 rpm (4-pole, 120 Hz); Nominal 3450 rpm (4 pole, 115 Hz) Maximum temperature winding wire NEMA class 200 - Hermetically sealed windings - 6” double flange NEMA mounting design - Field replaceable, factory installed over-molded lead for cable resilience: 13 ft - Stainless steel shell - Sand slinger - Kingsbury-type, water-lubricated, thrust bearing: - 7.5-30HP – 3,500 lb - >40HP – 6,000 lb - Pressure-equalizing diaphragm, spring pre-loaded - Nominal ambient temperature: 86°F (30°C) - Cooling flow: - 7.5-30HP - 0.5 ft/s - >40HP - 1.6 ft/s - Max. storage temperature: 5°F to 140°F - System Supply Voltage: 460 V (120 Hz) - Voltage Tolerance: ± 10 % UN - Motor ingress protection IP68 and insulation class F - NSF/ANSI 61 Certified - Rotation counterclockwise facing shaft end (rotation reversible) - Motors installation orientation: Vertical/horizontal (shaft end heightened)

المواصفات

Frequency	120 Hz
Phases	Three-Phase
Amps - Full Load	74 A
Amps - Service Factor	80 A
Volts	460 VAC
Voltage Tolerance (%)	-10.0% / +10.0%
Wire	3-Wire
Thrust Bearing Rating	6000 lb
Lead Length	13 ft
Motor	Encapsulated
Continuous Duty	Yes
Efficiency Service Factor Load [%]	91.50 %
Protection [IP]	IP68
Hz	120 Hz
Lead Wire Size	AWG #8
Lead Retainer Method	Lead Jam Nut
Poles	4
S.F.	1.15
Motor NEMA Frame Type	6"
Motor Cooling	Water
Motor Ambient Temperature Rating Nominal	86 °F
Rotation	Counter clockwise facing the shaft
Winding Resistance (Main Winding)	0.19
Thrust Bearing	Kingsbury Type
Seal	Mechanical Seal
Lead Insulation Material	EPR
Diaphragm Material	Nitrile Rubber (NBR)
Motor Fill Solution (Water Soluble / Non Toxic)	Yes
Shaft Slinger Material	Nitrile Rubber (NBR)
Stator/ Motor Shell Material	304 SS
Winding Material	Copper
Motor Length	40.18 "
Product Weight	379.2 lb
Product Weight with Pack	185 lb
Carton Length	47.24 "
Carton Width	6.1 "
Carton Height	8.35 "
Shaft End	Spline
Minimum Order Quantity	1
Drinking Water Agency Approvals	ANSI/NSF Standard 61
Electrical Agency Approvals	UL
Warranty Standard Time	12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
Repair Kit Available	Yes
Item #	2360869566E
Model	6R1-PM-51.7-460-120-W-US-LEAD
Series	6-Inch MagForce Three Phase Permanent Magnet Models
Product family	6-Inch Encapsulated MagForce High Efficiency Motor
SubTrol Heat Sensor	No
HP 120Hz	40-60 hp
Motor Diameter - Physical Diameter	5.44"
Motor Insulation Classification	F
Motor Shaft End - Material	Stainless Steel 1.4462
Motor Fill Solution	FES91
Shaft Diameter	1 "
Maximum Immersion Depth	1181.1 ft
Service Factor - 120Hz	1.15
VFD Required	YES
Minimum Cooling Flow	1.6 ft/sec
Motor Adapter	Double flange
Motor Bottom End Bell Material	Cast Iron with E-Coat Paint
Motor Top End Bell Material	Cast Iron with E-Coat Paint
Stator Ends Material	Carbon Steel
Stator Fill	Resin
Type	Sand Fighter
Motor Connection	DOL
Maximum Starts in a 1 Hour Period	20