IOB800 Expansion Board and cables

ZETTLER

IOB800 Expansion Board and cables

رقم القطعة: 557.202.006

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The 80-Way Mimic allows custom-made display and presentation panels to be incorporated into an MZX network. The single PCB can be mounted in an expansion box or on the rear of a free-standing panel and can be used to drive up to 80 zonal LED indicators, arranged in any configuration, together with two FIRE LEDs, one FAULT LED and one ISOLATE LED. The indicators operate in the same manner as the corresponding indicators on the panel. A remote mimic can also be connected to an MPM800 configured as a remote mimic driver. Up to 15 MPM800’s can be connected on to the remote bus, each with a unique address. The Mimic includes audible and visible warning facilities. The FB800 fuse board provides terminations for 15 fused 24Vdc output spurs from a single 24V d.c. input. The FB800 is designed to be normally mounted on the PSU830 power supply. The fuses are rated at 500mA. The IOB800 is an LPCB approved board providing panel I/O expansion of 8 opto-isolated digital inputs and 8 x 24V d.c. relay outputs. The IOB800 also incorporates a connector which provides decoded signals for the 8 inputs and 8 outputs for specialist interfacing. Expansion to the following panel components is possible: 8IN/16OUT)

المواصفات

ZETTLER Order Code557.202.006
ZETTLER CategoryIsolators, Accessories & Test Equipment
ZETTLER Device ClassAccessory
ZETTLER ModelIOB800
ZETTLER RangeAccessori per le centrali
Number of loops2 SP, 1 HP
Dimensions (H x W x D)480 x 410 x 140 mm
Weight11.0 kg
IP ratingIP30
HousingRAL 7016 fine texture, matt
Door ColourRAL 7040 fine texture,
Operating Temperature-5°C to + 40 °C
Storage temperature–20°C to +70°C
Relative humidity (non-condensing)90% relative humidity, continuous
EMC/RFIEN50130-4, EN61000-6-3
Supply voltage230 V AC, 50/60 Hz
Input current1.6 A
Relative humidityUp to 95% RH Non- Condensing
Operating Temp-10°C to +55°C
Storage Temp-20°C to +65°C
Dimensions235H x 190W mm
Input Voltage110 to 230 V AC
Output Voltage24 V DC / 5 A
Power Consumption11mA (Quiescent) 200mA (25% Alarm) 800mA (Lamp Test)
In standby mode29 mA
(W x H x D)164 x 80 x 20
Number of alarm group LEDs16
Addresses per loopUp to 250 on 1 SP or 2 HP loops
Total number of addresses250
Border of operating panelmatt RAL 7016
ConfiguredPro885D: 80
557.202.006IOB800 8 I/O card
557.202.844PNI800 PROFILE Flexible network interface slot card
557.202.842LX800 PROFILE Flexible loop expansion slot card
557.202.100FB800 Fuse board 15 way
557.202.081FOM800 Glass-fiber module for use with PNI800
Housing sizefor 2 batteries up to 38 Ah 31
In standby mode (max.)3 V DC
In alarm mode: Min.4 V DC/ Max. 30 V DC
In alarm mode208 mA
Relay contacts (max.)30 V DC/2 A
Number of inputs and outputs8/8
Operation-10°C to +70°C
Storage-20°C to +85°C
PROFILE Flexible panels. — 557.202.100FB800 Fuse Board 15 Way
PROFILE Flexible panels. — 15 fused outputs24 V, 0.5 A
PROFILE Flexible panels. — Voltage24 V
PROFILE Flexible panels. — Fuses0.5 A, time-lag
PROFILE Flexible panels. — (W x H x D)80 x 164 x 14 mm
PROFILE Flexible panels. — Weight151 g 53

منتجات مشابهة

عوازل وملحقات ومعدات اختبار