FCM-1 Control Module
رقم القطعة: FCM-1
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
FCM-1(A) Control Module: The FCM-1(A) Addressable Control Module provides Notifier intelligent fire alarm control panels a circuit for Notification Appliances (horns, strobes, speakers, etc.). Addressability allows the FCM-1(A) to be activated, either manually or through panel programming, on a select (zone or area of coverage) basis. FRM-1(A) Relay Module: The FRM-1(A) Addressable Relay Module provides the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc. Addressability allows the dry contact to be activated, either manually or through panel programming, on a select basis. FlashScan® (U.S. Patent 5,539,389) is a communication protocol developed by NOTIFIER Engineering that greatly enhances the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs. • Built-in type identification automatically identifies these devices to the control panel. • Internal circuitry and relay powered directly by two-wire SLC loop. The FCM-1(A) module requires power (for horns, strobes, etc.), or audio (for speakers). • Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated. • LED blink may be deselected globally (affects all devices). • High noise immunity (EMF/RFI). • The FCM-1(A) may be used to switch 24-volt NAC power, audio (up to 70.7 Vrms). • Wide viewing angle of LED. • SEMS screws with clamping plates for wiring ease. • Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops. • Speaker, and audible/visual applications may be wired for Class B or A (Style Y or Z).
المواصفات
| Brand | NOTIFIER |
|---|---|
| Specifications / Normal Operating Voltage | 15 to 32 VDC |
| Specifications / VDC Maximum Current Draw | 6.5 mA (LED on) |
| Specifications / Average Operating Current | 375µA (LED flashing - in group poll mode) 350µA (LED flashing - in direct poll mode) |
| Specifications / NAC shorted) Maximum NAC Line Loss | 4 VDC External Supply Voltage (between |
| Specifications / Terminals T10 and T11) Maximum (NAC) | Regulated 24 |
| Specifications / VDC Maximum (Speakers) | 70.7 V RMS, 50 |
| Specifications / W Drain on External Supply | 1.7 mA Maximum using 24 VDC supply |
| Specifications / VRMS supply Max NAC Current Ratings | For class B wiring system, the current rating is 3A |
| Specifications / Temperature Range | 32°F to 120°F (0°C to 49°C) |
| Specifications / Humidity | 10% to 93% Non-condensing |
| Specifications / Non-condensing Dimensions | 4.675˝ H x 4.275˝ W x 1.4˝ D (Mounts to a 4˝ square by 21/8˝ deep box.) |
| Specifications / Accessories | SMB500 Electrical Box |
| Specifications / Maximum current draw | 6.5 mA (LED on) |
| Specifications / Maximum NAC Line Loss | 4 VDC |
| Specifications / Maximum (Speakers) | 70.7 V RMS, 50 W |