FMM-1 Intelligent Monitor Module
رقم القطعة: FMM-1
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
FMM-1(A) is a standard-sized module (typically mounts to a 4″ [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. • Built-in type identification automatically identifies this device as a monitor module to the control panel. • Powered directly by two-wire SLC loop. No additional power required. • High noise (EMF/RFI) immunity. • SEMS screws with clamping plates for ease of wiring. • Direct-dial entry of address: 01 – 159 on FlashScan loops; 01 – 99 on CLIP loops. • LED flashes green during normal operation (programmable option) and latches on steady red to indicate alarm. The FMM-1(A) Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It provides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The FMM-1(A) can be used to replace MMX-1(A) modules in existing systems.
المواصفات
| Brand | NOTIFIER |
|---|---|
| Specifications / Normal Operating Voltage | 15 to 32 VDC |
| Specifications / VDC Maximum Current Draw | 5.0 mA (LED on) |
| Specifications / Average Operating Current | 375 µA (group poll) |
| Specifications / Temperature Range | 32°F to 120°F (0°C to 49°C) |
| Specifications / Humidity | 10% to 93% Non-condensing |
| Specifications / Non-condensing Dimensions | 41⁄2˝ H x 4˝ W x 11⁄4˝ D (Mounts to a 4˝ square by 21⁄8˝ deep box.) |
| Specifications / IDC Shorted) EOL Resistance | 47K |
| Specifications / Ohms Maximum IDC Wiring Resistance | 1,500 |
| Specifications / Ohms Maximum IDC Voltage | 11 |
| Specifications / Volts Maximum IDC Current | 450µA |
| Specifications / Notifier). FIGURE 1. CONTROLS AND INDICATORS | C1067-00 NO-460-010 1 I56-3506-001 FMM-1 Monitor Module I56-3506-001 |
| Specifications / Maximum current draw | 5.0 mA (LED on) |
| Specifications / EOL Resistance | 47K Ohms |
| Specifications / Maximum IDC Wiring Resistance | 1,500 Ohms |
| Specifications / Maximum IDC Voltage | 11 Volts |
| Specifications / Maximum IDC Current | 450µA |