Belden

XTran PSU 18-60 VDC for XT-1104-A, XT-2206-A, XT-2209-A and XT-2210-A nodes

رقم القطعة: DCP-A

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

XTran PSU 18-60 VDC for XT-1104-A, XT-2206-A, XT-2209-A and XT-2210-A nodes

المواصفات

NameV30912-A5020-A2
Overall Width40.32 mm
Overall Height126 mm
Overall Depth193 mm
Weight0.9 kg
Update and RevisionRevision Number: 0.27 Revision Date: 12-16-2025
Source URLhttps://www.belden.com/products/industrial-networking-cybersecurity/mpls-networks/xtran/dcp-a
Belden Taxonomy Pathindustrial-networking-cybersecurity > mpls-networks > xtran
Belden Categoryindustrial-networking-cybersecurity
Belden Subcategorympls-networks
Belden Sub-subcategoryxtran
Datasheet URLhttps://catalog.belden.com/techdata/EN/DCP-A_techdata.pdf
Relative humidity (non-condensing)0-95 %
Safety of industrial control equipmentEN 62368-1:2014
Accessories to Order SeparatelyPSU cable (3m) for DCP-A power supply: S30927-C2-A30
Operating Temperature Range-30° to +65°C (-22° to 149°F)
Storage Temperature Range-30° to +75°C (-22° to 167°F)
Product CategoryPower Supplies
TransportationEN 50121-4:2016 + A1:2019
GuaranteeStandard 1 year (extension possible)
Product DocumentationAvailable via Belden Solutions Portal site
CertificatesAvailable via Belden Solutions Portal site
Input Voltage18-60VDC (nominal 24VDC)
Basis StandardCE, EN 55032:2015 + A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 + A2 :2021, EN 55035:2017 + A11:2020, EN IEC 61000-6-1:2019, EN IEC 61000-6-2:2019, EN IEC 61000-6-3:2021, EN IEC 61000-6-4:2019
MTBF (MIL-HDBK 217F: Gb 25 ºC)34 Years
Power Supply ProtectionAuto restart: Over temperature / Overcurrent
Power Supply EfficiencyAt 48VDC and Pout is 220W: 90%; At 24VDC and Pout is 220W: 88%
Output Power220W
Inrush Current MaxCold start 48VDC: 30A
Power Supply ConnectorPC 4/ 3-G-7,62 BK and BF-PC 4 BK on front panel, PC 4 HV/ 3-STF-7,62 for cable
Node CompatibilityXT-1104-A, XT-2206-A, XT-2209-A, XT-2210-A
Power UtilityEN 61000-6-5:2015, EN 61850-3:2014 (§6.7), IEEE 1613-2009 (§4), IEEE1613-2013 (clause 5,7,8,9,10)