Belden

XTran PSU 88-300 VDC for XT-2215-A nodes

رقم القطعة: DCP-D

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

XTran PSU 88-300 VDC for XT-2215-A nodes

المواصفات

NameV30912-A5020-A6
Overall Width200.0 mm
Overall Height44.5 mm
Overall Depth285.8 mm
Weight2.62 kg
Update and RevisionRevision Number: 0.29 Revision Date: 12-16-2025
Source URLhttps://www.belden.com/products/industrial-networking-cybersecurity/mpls-networks/xtran/dcp-d
Belden Taxonomy Pathindustrial-networking-cybersecurity > mpls-networks > xtran
Belden Categoryindustrial-networking-cybersecurity
Belden Subcategorympls-networks
Belden Sub-subcategoryxtran
Datasheet URLhttps://catalog.belden.com/techdata/EN/DCP-D_techdata.pdf
Relative humidity (non-condensing)0-95 %
Safety of industrial control equipmentEN 62368-1:2014
Accessories to Order SeparatelyPSU cable for DCP-D power supply: S30927-C17-A30
Operating Temperature Range-20° to +55°C (-4° to 131°F)
Storage Temperature Range-30° to +75°C (-22° to 167°F)
Product CategoryPower Supplies
TransportationEN 50121-4:2016 + A1:2019
GuaranteeStandard 1 year (extension possible)
Product DocumentationAvailable via Belden Solutions Portal site
CertificatesAvailable via Belden Solutions Portal site
Input Voltage88-300VDC (nominal 230 VDC, tolerance according to EN62368-1)
Basis StandardCE, EN 55032:2015 + A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 + A2 :2021, EN 55035:2017 + A11:2020, EN IEC 61000-6-1:2019, EN IEC 61000-6-2:2019, EN IEC 61000-6-3:2021, EN IEC 61000-6-4:2019
MTBF (MIL-HDBK 217F: Gb 25 ºC)34 years with 2 units in a chassis, 900W Load
Power Supply ProtectionAuto recoverable: Overtemperature / Overcurrent / Overvoltage
Power Supply EfficiencyAt 230VDC (full load): 89% (measured including fans)
Output Power900W
Inrush Current MaxCold start (full load) ETSI 300-132: < 30 Apk, at 230VDC
Power Supply ConnectorPC 4/ 3-G-7,62 and BF-PC 4 on front panel, SPC 5/ 3-STF-7,62 for cable
Node CompatibilityXT-2215-A
Power UtilityEN 61000-6-5:2015, EN 61850-3:2014 (§6.7), IEEE 1613-2009 (§4), IEEE1613-2013 (clause 5,7,8,9,10)