Caterpillar

735 Articulated Truck

Name: 735 Articulated Truck
Brand: Caterpillar
SKU: CAT-130500

رقم القطعة: CAT-130500

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

735 Articulated Truck

المواصفات

Engine Model	Cat® C13B
Gross Power (SAE J1995)	325 kW
Rated Payload	32 t
Net Power (SAE J1349)	319 kW
Engine Power (ISO 14396)	322 kW
Bore	130 mm
Stroke	157 mm
Displacement	12.5 l
Peak Engine Torque Gross (SAE J1995)	2206 N·m
Peak Engine Torque Speed	1200 r/min
Peak Engine Torque Net (SAE J1349)	2185 N·m
Note (1)	Advertised power is tested at 1,800 rpm.
Note (2)	Advertised power is tested per the specified standard in effect at the time of manufacture.
Lock to Lock	4.75 seconds @ 60 rpm
Note (3)	Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Forward - 1	8 km/h
Note (4)	Net power when the fan is at maximum speed is 319 kW (427 hp) per the SAE reference conditions.
Forward - 2	15 km/h
Note (5)	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Forward - 3	23 km/h
Note (6)	Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Turning Dimensions - Steer Angle - Left/Right	45°
Forward - 4	35 km/h
Heaped (SAE 2:1)	20 m³
No Engine De-rating Below	3810 m
Turning Dimensions - Aisle Width	5332 mm
Turning Dimensions - Clearance Radius	8075 mm
Forward - 5	48 km/h
Struck	16 m³
Turning Dimensions - SAE Turning Radius	7470 mm
Turning Dimensions - Inside Radius	3879 mm
Forward - 6	57 km/h
Tailgate Heaped SAE 2:1	21.7 m³
Note	Dimensions are for machines equipped with 750/65 R25 tires.
Reverse - 1	9 km/h
Tailgate Struck	17 m³
Fuel Tank	400 l
Sound Levels — Note (1)	The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Cooling System	83 l
Sound Levels — Note (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hydraulic System	123 l
Front Axle - Empty	14780 kg
Interior Cab	72 dB(A)
DEF Tank	34 l
Engine Crankcase	43 l
Center Axle - Empty	5080 kg
Transmission	47 l
Rear Axle - Empty	4850 kg
Output Transfer Gear Box	25 l
Final Drives/Differential	125 l
Total - Empty	24710 kg
Brakes	ISO 3450 – 2011
Front Axle - Rated Load	4054 kg
Cab - FOPS	ISO 3449 Level II – 2005
Center Axle - Rated Load	13973 kg
Cab - ROPS	ISO 3471 – 2008
Rear Axle - Rated Load	13973 kg
Steering	ISO 5010 – 2019
Total - Rated Load	32000 kg
Model	735
Front Axle - Loaded	18834 kg
Product Page	https://www.cat.com/en_US/products/new/equipment/articulated-trucks/three-axle-articulated-trucks/130500.html
Center Axle - Loaded	19053 kg
Caterpillar Category	Three Axle Articulated Trucks
Rear Axle - Loaded	18823 kg
Caterpillar Category Path	Products > Equipment > Articulated Trucks > Three Axle Articulated Trucks > 735
Total - Loaded	56710 kg
Caterpillar Product Family	equipment
Type	High strength Brinell HB450 wear resistant steel
Caterpillar Product Page ID	130500
Front Plate	7 mm
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20251125-88ff4-1e97e
Base Plate	13 mm
Side Plates	11 mm
Raise Time	12 s
Lower Time	11 s
Hydraulic Excavators: 350/352 - Passes	4-5
Hydraulic Excavators: 336 - Passes	5-6
Wheel Loaders: 972/972 XE - Passes	3-4
Wheel Loaders: 966/966 XE - Passes	4
Wheel Loader: 962 - Passes	4-5
Optimal Loader/Truck Pass Matching — Note	An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Wheel Loader: 950 - Passes	5