Caterpillar

MH3022 Wheel Material Handler

Name: MH3022 Wheel Material Handler
Brand: Caterpillar
SKU: CAT-126801

رقم القطعة: CAT-126801

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

MH3022 Wheel Material Handler

المواصفات

Engine Model	Cat® C4.4
Bore	105 mm
Stroke	127 mm
Displacement	4.4 l
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. **Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Note	Operating weight includes full fuel tank, operator, 1400 kg (3,100 lb) work tool. Weight varies depending on configuration.
Cooling System	36 l
Final Drive - Each	2.5 l
Model	MH3022
Product Page	https://www.cat.com/en_US/products/new/equipment/material-handlers/wheel-material-handlers/126801.html
Caterpillar Category	Wheel Material Handlers
Caterpillar Category Path	Products > Equipment > Material Handlers > Wheel Material Handlers > MH3022
Caterpillar Product Family	equipment
Caterpillar Product Page ID	126801
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20250611-634f5-2716a
Fuel Tank Capacity	350 l
Maximum Travel Speed	20 km/h
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Operating Weight	24500 kg
Recyclability	95%
Hydraulic Tank	155 l
Engine Oil	13 l
Diesel Exhaust Fluid (DEF) Tank	30 l
Maximum Reach	9280 mm
Drawbar Pull	127 kN
Ground Clearance	310 mm
Tail Swing Radius	2600 mm
Net Power - ISO 9249	108 kW
Net Power - ISO 9249 (DIN)	147 hp (metric)
Engine Power - ISO 14396 (DIN)	150 hp (metric)
Biodiesel Capability	Up to B20¹
Boom	MH 5.35 m (17'7")
Stick	4.3 m (14'1") Straight
Maximum Pressure - Travel	35000 kPa
Maximum Pressure - Swing	36500 kPa
Swing Speed	8 r/min
Maximum Swing Torque	54 kN·m
Hydraulic System - Including Tank	345 l
Shipping Length	8300 mm
Counterweight Clearance	1300 mm
Undercarriage Length	4900 mm
Wheel Base	2600 mm
Air Conditioning System — Note (1)	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system contains 1.3 kg (2.9 lb) of refrigerant which has a CO2 equivalent of 1.859 metric tonnes (2.049 tons). If equipped with R1234yf (Global Warming Potential = 0.5), the system contains 1 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 0.001 metric tonnes (0.001 tons).
Maximum Height	10760 mm
Maximum Depth	1460 mm
Boom Pin Height	7120 mm
Maximum Pressure - Implements	35000 kPa
Cab Height-Lowered with OPG	3350 mm
Cab Height-Raised	5750 mm
Cab Height-Raised with OPG	5750 mm
Engine Power - Maximum - ISO 14396	110 kW
Minimum Dump Height	3310 mm
Maximum Gradeability	65%
Rear Axle - Housing (Differential)	14 l
Powershift Transmission	2.5 l
Machine Length	4950 mm
Cab Height- Lowered	3350 mm
Shipping Width	2540 mm