Caterpillar

775 Off-Highway Truck

Name: 775 Off-Highway Truck
Brand: Caterpillar
SKU: CAT-122020

رقم القطعة: CAT-122020

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

775 Off-Highway Truck

المواصفات

Engine Model	Cat® C27
Gross Power - SAE J1995:2014	615 kW
Net Power - SAE J1349:2011	572 kW
Bore	137 mm
Stroke	152 mm
Displacement	27 l
Note (1)	Capacity with Dual Slope body – no liner.
Note (2)	* Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
Note (3)	No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.
Forward - 1	10.6 km/h
Forward - 2	15 km/h
Forward - 3	20.3 km/h
Forward - 4	27 km/h
Heaped (SAE 2:1)	42.2 m³
Forward - 5	36.7 km/h
Struck	32.6 m³
Forward - 6	49.4 km/h
Note	Maximum travel speeds with standard 24.00R35 (E4) tires.
Forward - 7	66.9 km/h
Fuel Tank	795 l
Cooling System	171 l
Front Axle - Empty	50 %
Rear Axle - Empty	50 %
Model	775 (07)
Front Axle - Loaded	34 %
Product Page	https://www.cat.com/en_US/products/new/equipment/off-highway-trucks/off-highway-trucks/122020.html
Caterpillar Category	Off-Highway Trucks
Rear Axle - Loaded	66 %
Caterpillar Category Path	Products > Equipment > Off-Highway Trucks > Off-Highway Trucks > 775 (07)
Caterpillar Product Family	equipment
Caterpillar Product Page ID	122020
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20251021-85073-e89c4
Emissions	Meets EU Stage V emission standards.
Recyclability	98%
Net Power - ISO 9249	578 kW
Engine Power - ISO 14396	605.2 kW
Engine — Note (1)	Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.
Engine — Note (2)	Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Differential Ratio	3.64:1
Planetary Ratio	4.80:1
Top Speed - Loaded	66.9 km/h
Pump Flow - High Idle	448 L/min
Total Reduction Ratio	17.49:1
Relief Valve Setting - Raise	17250 kPa
Body Raise Time - High Idle	10 s
Brake Surface - Front	655 cm²
Body Lower Time - Float	14 s
Brake Surface - Rear	61269 cm²
Tires — Note (1)	Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Brake Standards	ISO 3450:2011
Tires — Note (2)	Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Relief Valve Setting - Lower	3450 kPa
Crankcase	90 l
Empty Loaded Cylinder Stroke Front	234 mm
Rear axle - Oscillation	8.1°
Empty Loaded Cylinder Stroke Rear	149 mm
Steer Angle	31 °
Steering Standards	ISO 5010:2007
Steering Tank	36 l
Turning Diameter - Front	23.5 m
Steering System - Including Tank	54 l
Differential - Final Drives	145 l
Turning Circle - Clearance Diameter	26.1 m
Standard Tire	24.00R35 (E4)
Brake Hoist System	322 l
FOPS Standards	Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
Reverse	14 km/h
Body Power Down - High Idle	14 s
Sound Standards (1)	The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Target Payload (100%)	64 t
Maximum Working Payload (110%)	70.3 t
Maximum Allowable Payload (120%)*	76.7 t
Body Capacity - SAE 2:1	42.23 m³
Sound Standards (2)	The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).
Nominal Payload Class (100%)	64 t
Rated Engine Speed	1800 r/min
Net Power - 80/1269/EEC	578 kW
Peak Torque - Speed	1200 r/min
Net Torque	4269 N·m
Capacity - Dual Slope - 100% Fill Factor — Note (1)	Contact your local Cat dealer for body recommendation.
Capacity - Dual Slope - 100% Fill Factor — Note (2)	*ISO 6483:1980
Brake/Hoist Hydraulic Tank	176 l
Capacity - Flat Floor - 100% Fill Factor — Struck	32.3 m³
Sound Standards (3)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Capacity - Flat Floor - 100% Fill Factor — Note (1)	Contact your local Cat dealer for body recommendation.
ROPS Standards	Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
Capacity - Flat Floor - 100% Fill Factor — Note (2)	*ISO 6483:1980
Torque Converter - Transmission System - LRC	61 l
Torque Converter - Transmission System - HRC	70 l
Maximum Gross Vehicle Weight	111812 kg