834 Wheel Dozer
رقم القطعة: CAT-128220
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: CAT-128220
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
834 Wheel Dozer
| Engine Model | Cat® C18 |
|---|---|
| Gross Power - SAE J1995:2014 | 419 kW |
| Net Power - SAE J1349:2011 | 370 kW |
| Bore | 145 mm |
| Stroke | 183 mm |
| Displacement | 18.1 l |
| Note (1) | Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
| Note (2) | The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3. |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Forward - 1 | 6.8 km/h |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Forward - 2 | 11.6 km/h |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Forward - 3 | 20.3 km/h |
| Forward - 4 | 35.4 km/h |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons). |
| Note | Travel speeds based on 35/65-R33 tire |
| Reverse - 1 | 6.8 km/h |
| Fuel Tank | 793 l |
| Cooling System | 120 l |
| Reverse - 2 | 12.2 km/h |
| Transmission | 120 l |
| Brakes | ISO 3450: 2011 |
| Model | 834 |
| Product Page | https://www.cat.com/en_US/products/new/equipment/dozers/wheel-dozers/128220.html |
| Caterpillar Category | Wheel Dozers |
| Caterpillar Category Path | Products > Equipment > Dozers > Wheel Dozers > 834 |
| Caterpillar Product Family | equipment |
| Caterpillar Product Page ID | 128220 |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20240325-f48e1-3f310 |
| Front | Fixed |
| Operating Weight | 47750 kg |
| Rated Speed | 1900 r/min |
| Ground Clearance | 531 mm |
| Wheel Base | 4550 mm |
| Torque Rise | 52 % |
| Height - Top of Cab | 4184 mm |
| Diesel Exhaust Fluid Tank | 33 l |
| Crankcase | 60 l |
| Service Refill Capacities — Note (1) | All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. • For pre-Tier 4 engines: Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to: • 100% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * For use of blends higher than 20% biodiesel, consult your Cat dealer. ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. |
| Reverse - 3 | 21.4 km/h |
| Lift/Tilt System - Circuit | Pilot operated LS valve with EH |
| Maximum Flow | 250 L/min |
| Transmission Type | Cat planetary power shift |
| Rear | Trunnion |
| Differential - Final Drives - Rear | 186 l |
| Differential - Final Drives - Front | 186 l |
| Height - Top of Hood | 3334 mm |
| Peak Power Speed | 1500 r/min |
| Direct Drive - Forward 1 | Lock-up disabled |
| Direct Drive - Forward 2 | 12.4 km/h |
| Direct Drive - Forward 3 | 22.1 km/h |
| Direct Drive - Reverse 1 | 7.2 km/h |
| Direct Drive - Forward 4 | 38.5 km/h |
| Direct Drive - Reverse 2 | 13 km/h |
| Direct Drive - Reverse 3 | 23 km/h |
| Relief Valve Setting - Lift/Tilt | 32000 kPa |
| Cylinders, Double Acting - Lift, Bore and Stroke | 139.75 mm × 1021 mm (5.5 in × 40.2 in) |
| Lift/Tilt System | Variable displacement piston |
| Pilot System | Variable displacement piston |
| Steering System - Circuit | Pilot, load sensing |
| Steering System - Pump | Piston, variable displacement |
| Relief Valve Setting - Steering | 24100 kPa |
| Total Steering Angle | 86 ° |
| Oscillation Angle | ±13° |
| Steering Cycle Times - High Idle | 3.1 s |
| Steering Cycle Times - Low Idle | 5.7 s |
| Hydraulic System Factory Fill | 240 l |
| Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 109 dB(A) |
| Sound Performance - Tier 4 Final / Stage V — Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” |
| Hydraulic System - Tank Only | 140 l |
| Sound Performance - Tier 4 Final / Stage V — Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 |
| Sound Performance - Tier 3 / Stage IIIA — Machine Sound Power Level (ISO 6395:2008) | 110 dB(A) |
| Sound Performance - Tier 3 / Stage IIIA — Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” |
| Sound Performance - Tier 3 / Stage IIIA — Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 |
| Peak Torque - 1,300 rpm | 2836 N·m |
| Blade Capacities | 7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
| Maximum Flow at 1,900 rpm | 582 L/min |
| Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke | 140 mm × 230 mm (5.5 in × 9.1 in) |
| Pilot Maximum Flow | 52 L/min |
| Pilot Relief Valve Setting | 4000 kPa |
| Height - Top of Exhaust Stack | 4835 mm |
| Height - Top of Air Cleaner | 3895 mm |
| Ground Clearance - Bumper | 933 mm |
| Centerline of Rear Axle to Edge of Bumper | 3187 mm |
| Centerline of Front Axle to Hitch | 2275 mm |
| Length - Front of Tire | 8715 mm |
| Length - Straight Blade on Ground | 9927 mm |
| Length - Universal Blade on Ground | 10470 mm |

Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر
Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر
Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر
Caterpillar
اطلب عرض سعر