Caterpillar

854 Wheel Dozer

Name: 854 Wheel Dozer
Brand: Caterpillar
SKU: CAT-120400

رقم القطعة: CAT-120400

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

854 Wheel Dozer

المواصفات

Engine Model	Cat C32B
Bore	145 mm
Stroke	162 mm
Displacement	32.1 l
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)	Net torque rise meets SAE J139.
Note (3)	No engine derating required up to 3050 m (10,000 ft) altitude.
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. If equipped with 1234yf (Global Warming Potential = 0.501), the system contains 2.1 kg of refrigerant, which has a CO2 equivalent of 0.001 metric tonnes (2.2 lbs). If equipped with 134a (Global Warming Potential = 1430), the system contains 1.8 kg (4.6 lb) of refrigerant, which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons).
Note	Travel speeds based on 45/65-45 L-5 46 ply tires.
Cooling System	200 l
Transmission	169 l
Brakes	Meets ISO 3540:2011
Model	854
Product Page	https://www.cat.com/en_US/products/new/equipment/dozers/wheel-dozers/120400.html
Caterpillar Category	Wheel Dozers
Caterpillar Category Path	Products > Equipment > Dozers > Wheel Dozers > 854
Caterpillar Product Family	equipment
Caterpillar Product Page ID	120400
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20230823-ff2d7-0f46f
Front	Fixed
Gross Power	676 kW
Operating Weight	101 898 kg
Rated Speed	1750 r/min
Ground Clearance	691 mm
Wheel Base	5890 mm
Operating Specifications — Operating Weight	101898 kg
Torque Rise	30 %
ROPS/FOPS	ISO 3471:2008 and ISO 3449:2005 Level II Standards
Crankcase	120 l
Service Refill Capacities — Note (1)	- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfer or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf
Height - Top of ROPS	5590 mm
Fuel Tank - Standard	1562 l
Transmission Type	Cat Planetary Power Shift
Rear	Trunnion
Differential - Final Drives - Rear	342 l
Differential - Final Drives - Front	369 l
Height - Top of Hood	3984 mm
Peak Torque - 1,200 rpm	4242 N·m
Direct Drive - Forward 1	Lock-up disabled
Direct Drive - Forward 2	13 km/h
Direct Drive - Forward 3	22.8 km/h
Direct Drive - Reverse 1	8 km/h
Direct Drive - Reverse 2	14.3 km/h
Direct Drive - Reverse 3	25.1 km/h
Cylinders, Double Acting - Lift, Bore and Stroke	177 mm × 1760 mm (0.58 ft × 5.8 ft)
Relief Valve Setting	34500 kPa
Steering System - Circuit	Pilot, load sensing
Steering System - Pump	Piston, variable displacement
Total Steering Angle	86 degrees
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249	607 kW
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995	671 kW
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995	676 kW
Emissions (Tier 2 Equivalent): Net Power ISO - 9249	614 kW
Converter Drive - Forward 1	7.1 km/h
Converter Drive - Forward 2	12.4 km/h
Blade Capacities	30.5 to 44.8 m3 (40 to 58.6 yd3)
Converter Drive - Forward 3	21.2 km/h
Converter Drive - Reverse 1	7.7 km/h
Converter Drive - Reverse 2	13.5 km/h
Converter Drive - Reverse 3	23.5 km/h
Output at 1,850 rpm and 6900 kPa (1,000 psi)	610 L/min
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke	267 mm × 286 mm (0.88 ft × 0.94 ft)
Hydraulic System - Steering and Engine Cooling Fan - Tank Only	290 l
Height - Top of Exhaust Pipe	5234 mm
Centerline of Rear Axle to Edge of Bumper	4195 mm
Centerline of Front Axle to Hitch	2945 mm
Length - With Blade on Ground	13405 mm
Minimum Turning Radius - Over Blade	9550 mm
Sound Performance	• The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.