814 Wheel Dozer
رقم القطعة: CAT-106480
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
814 Wheel Dozer
المواصفات
| Engine Model | Cat® C7.1 |
|---|---|
| Gross Power - SAE J1995:2014 | 212 kW |
| Net Power - SAE J1349:2011 | 186 kW |
| Bore | 105 mm |
| Stroke | 135 mm |
| Displacement | 7.01 l |
| Note (1) | Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module, and alternator. |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed. |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed. |
| Forward - 1 | 5.9 km/h |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Forward - 2 | 10.4 km/h |
| Forward - 3 | 18.1 km/h |
| Forward - 4 | 31.3 km/h |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
| Reverse - 1 | 6.7 km/h |
| Fuel Tank | 500 l |
| Reverse - 2 | 11.8 km/h |
| Engine Crankcase | 20 l |
| Transmission | 50 l |
| Model | 814 |
| Product Page | https://www.cat.com/en_US/products/new/equipment/dozers/wheel-dozers/106480.html |
| Caterpillar Category | Wheel Dozers |
| Caterpillar Category Path | Products > Equipment > Dozers > Wheel Dozers > 814 |
| Caterpillar Product Family | equipment |
| Caterpillar Product Page ID | 106480 |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20210212-24248-1b352 |
| Front | Planetary – Fixed |
| Height | 1001 mm |
| Emissions | Option 1 - U.S. EPA Tier 4 Final/EU Stage V |
| Dig Depth | 493 mm |
| Rated Speed | 2200 r/min |
| Ground Clearance | 904 mm |
| Engine Power - ISO 14396:2002 | 205 kW |
| Wheel Base | 3350 mm |
| Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released |
| Torque Rise | 52% |
| Height - Top of Cab | 3694 mm |
| Diesel Exhaust Fluid Tank | 16 l |
| Service Brakes | Single Disc Wet (enclosed) 4 WHL |
| Service Refill Capacities — Note (1) | All nonroad Tier 4 Final and EU Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. |
| Reverse - 3 | 20.6 km/h |
| Reverse - 4 | 35.5 km/h |
| Lift/Tilt System - Circuit | Pilot operated load sensing valve with EH |
| Transmission Type | Cat Planetary Power Shift |
| Rear | Planetary – Oscillating |
| Differential - Final Drives - Rear | 65 l |
| Differential - Final Drives - Front | 65 l |
| Height - Top of Hood | 2663 mm |
| Engine — Emissions | Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA |
| Engine — Gross Power - SAE J1995:2014 | 213 kW |
| Relief Valve Setting - Lift/Tilt | 22000 kPa |
| Cylinders, Double Acting - Lift, Bore and Stroke | 120 mm × 915 mm (4.7 in × 36 in) |
| Lift/Tilt System | Variable displacement piston |
| Pilot System | Open center, fixed displacement gear |
| Steering System - Circuit | Pilot, load sensing |
| Steering System - Pump | Variable displacement piston |
| Relief Valve Setting - Steering | 27600 kPa |
| Total Steering Angle | 72° |
| Oscillation Angle | ±10° |
| Steering Cycle Times - High Idle | 3 s |
| Steering Cycle Times - Low Idle | 8.2 s |
| Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 109 dB(A) |
| Sound Performance - Tier 4 Final / Stage V — Note (1) | * Sound suppression equipped |
| Sound Performance - Tier 3 / Stage IIIA — Machine Sound Power Level (ISO 6395:2008) | 110 dB(A) |
| Overall Width | 3656 mm |
| Sound Performance - Tier 3 / Stage IIIA — Note (1) | * Sound suppression equipped |
| Sound Performance - Tier 3 / Stage IIIA — Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed. |
| Hydraulic System - Implement/Steering | 129 l |
| Net Power - ISO 9249:2007 | 186 kW |
| Peak Torque (1400 rpm) | 1223 N·m |
| Engine Power - ISO 14396: 2002 | 205 kW |
| Peak Torque ( 1,400 rpm ) | 1016 N·m |
| High Idle Speed | 2270 r/min |
| Engine — Torque Rise | 26 % |
| Low Idle Speed | 800 r/min |
| Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke | 101.6 mm × 234 mm (4 in × 9.2 in) |
| Maximum Altitude without Derating | 3000 m |
| Operating Weight (Tier 4 Final/Stage V) | 22011 kg |
| Pilot Relief Valve Setting | 21000 kPa |
| Operating Weight (Tier 3/Stage IIIA equivalent) | 21721 kg |
| Maximum Flow at 2,200 rpm | 89 L/min |
| Hydraulic System - Steering — Maximum Flow at 2,200 rpm | 147 L/min |
| Cooling Systems - Tier 4 Final/EU Stage V | 81 l |
| Height - Top of Exhaust Pipe | 3439 mm |
| Cooling Systems - Tier 3/Stage IIIA equivalent | 73 l |
| Centerline of Front Axle to Hitch | 1675 mm |
| Weight | 1396 kg |
| Hydraulic Tank Only | 75 l |
| Height to Top of Beacon | 3981 mm |
| Height to Top of Radiator Guard | 2453 mm |
| Ground Clearance to Hitch | 413 mm |
| Ground Clearance to Transmission Guard | 422 mm |
| Ground Clearance to Bottom of Bumper | 712 mm |
| Capacity | 2.84 m³ |
| Centerline of Rear Axle to Bumper | 1990 mm |
| Width over Platform | 3145 mm |
| Overall Length to Front Tire | 6356 mm |
| Maximum Tilt | 802 mm |
| Overall Machine Length with Straight Blade | 7190 mm |
| Turning Radius – Outside Corner of Blade | 7166 mm |
| Overall Machine Length with Coal Blade | 7784 mm |
| Turning Radius – Inside Corner of Blade | 3550 mm |
| Total Operating Weight | 22011 kg |
| Coal Blade — Capacity | 10.55 m³ |
| Coal Blade — Overall Width | 4321 mm |
| Coal Blade — Height | 1470 mm |
| Coal Blade — Dig Depth | 488 mm |
| Coal Blade — Ground Clearance | 932 mm |
| Coal Blade — Maximum Tilt | 945 mm |
| Coal Blade — Turning Radius – Outside Corner of Blade | 7647 mm |
| Coal Blade — Turning Radius – Inside Corner of Blade | 3420 mm |
| Coal Blade — Weight | 2062 kg |
| Coal Blade — Total Operating Weight | 22678 kg |
