Mitsubishi Electric

NZ2GNS12A2-16DTE - DC input: 12 points (single wiring) 6 points (double wiring), 24 V DC, 6.8 mA,…

رقم القطعة: NZ2GNS12A2-16DTE_3660

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

NZ2GNS12A2-16DTE - DC input: 12 points (single wiring) 6 points (double wiring), 24 V DC, 6.8 mA,…

المواصفات

Basic information / Model nameNZ2GNS12A2-16DTE
Basic information / OverviewDC input: 12 points (single wiring) 6 points (double wiring), 24 V DC, 6.8 mA, response time: 1...70 ms, 12 points/common, negative common, transistor output: 4 points (single wiring), 2 points (double wiring), 24 V DC, 1 A/point, response time: 0.4 ms, 4 points/common, source + source type, waterproof connector type
Basic information / Sales statusOn sale
Listed / SeriesRemote I/O
Listed / Model nameNZ2GNS12A2-16DTE
Weight0.52 kg
Basic information / Conformance standardUL cUL CE(EMC) CE(Machinery) CE(RoHS) IEC 61508 EN ISO 13849-1 KC(EMC)
Shock resistanceCompliant with JIS B 3502 and IEC 61131-2 (147 m/s2, 3 times each in 3 directions X, Y, Z)
Operating atmosphereNo corrosive gases, flammable gases, less conductive dust
Operating altitude0...2000 m
Installation locationInside a control panel
Overvoltage categoryII or less
Pollution degree2 or less
Insulation resistanceBetween all DC external terminals and ground: 10 MΩ or higher by 500 V DC insulation resistance tester
Operating ambient temperature0...55 ˚C
Storage ambient temperature-25...75 ˚C
Operating ambient humidityCompliant with IP67
Storage ambient humidity5...95 %RH, non-condensing
Network topologyLine topology, star topology (Coexistence of line topology and star topology is possible.), and ring topology
Listed / OutlineDC input: 12 points (single wiring) 6 points (double wiring), 24 V DC, 6.8 mA, response time: 1...70 ms, 12 points/common, negative common, transistor output: 4 points (single wiring), 2 points (double wiring), 24 V DC, 1 A/point, response time: 0.4 ms, 4 points/common, source + source type, waterproof connector type
Input typeDC input (negative common type)
Output typeTransistor output (source + source type)
Dielectric withstand voltageBetween all DC external terminals and ground: 500 V AC for 1 minute
External dimensions / Height238 mm
External dimensions / Width63 mm
External dimensions / Depth49 mm
Vibration resistance / Compliant with .. d IEC 61131-2 / Under intermittent vibration ~62dc24Frequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s2 Sweep count: 10 times each in X, Y, Z directions
Vibration resistance / Compliant with .. and IEC 61131-2 / Under continuous vibration ~d68864Frequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s2
Equipment classClass III
Listed / Large categoriesSafety I/O
Listed / Medium categoriesI/O
External interfaceCommunication part: M12 waterproof connector, 8 pins, female, X-code Module power supply part: M12 waterproof connector, 5 pins, male, female, L-code I/O part: M12 waterproof connector, 5 pins, female, A-code
CC-Link IE TSN ClassCC-Link IE TSN Class B (factory default) CC-Link IE TSN Class A
Multicast filterAvailable
Number of input points12 points (single wiring) 6 points (double wiring)
Rated input voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Rated input current6.8 mA TYP. (24 V DC)
Maximum number of simultaneous input points100 %
Station typeRemote station
ON voltage/ON current11 V DC or more/4 mA or more
OFF voltage/OFF current5 V DC or less/1.5 mA or less
Input resistance3.2 kΩ
Input common terminal arrangement12 points/common
Protection degreeIP67
CC-Link IE TSN protocol version / CC-Link IE TSN Class BCC-Link IE TSN Protocol version 1.0 CC-Link IE TSN Protocol version 2.0
CC-Link IE TSN protocol version / CC-Link IE TSN Class ACC-Link IE TSN Protocol version 2.0
Maximum response time for time-managed polling / CC-Link IE TSN Class A512 µs
Cyclic transmission / RX/RY points16 points
Cyclic transmission / RWr/RWw points20 points
Module power supply / Voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Module power supply / Current260 mA
Listed / Small categoriesDC input/transistor output
Number of output points4 points (single wiring), 2 points (double wiring)
Rated load voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Maximum load current4 A/point (Y0 to Y1), 2 A/point (Y2 to Y3), 8 A/common
Maximum inrush currentCurrent is limited by the overload protection function.
Leakage current at OFF0.1 mA or less
Maximum voltage drop at ON1.0 V DC or less
Surge suppressorZener diode
Output common terminal arrangement4 points/common
Protection functionLimited current when detecting overcurrent: 4.4...5.2 A/point
Input circuit response time / OFF to ON0.4 ms or less (24 V DC)
Output circuit response time / OFF to ON0.4 ms or less (24 V DC)
Input circuit response time / ON to OFF0.4 ms or less (24 V DC)
Output circuit response time / ON to OFF0.4 ms or less (24 V DC)
Safety remote station refresh response processing timeSafety remote station safety cycle time + Communication path response time
Input response time of safety remote stationInput circuit response time + Input response time (1 ms, 1.5 ms, 5 ms, 10 ms (factory default), 20 ms, 50 ms, 70 ms)
Output response time of safety remote stationOutput circuit response time
Cyclic transmission / SA\X/SA\Y pointsSA\X: 32 points SA\Y: 32 points
Module power supply / Protection functionModule power supply overvoltage protection function, module power supply overcurrent protection function
Module power supply / Fuse1.6 A (not replaceable), 7 A (not replaceable)
Safety remote station safety cycle time2.0 ms
Communication path response time0.3 ms
Load power supply and external power supply for output part / Voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Load power supply and external power supply for output part / Current60 mA
Load power supply and external power supply for output part / Protection functionExternal power supply overvoltage protection function
Power supply current for input device0.4 A/terminal