NZ2GNS12A2-14DT - DC input: 12 points (single wiring) 6 points (double wiring), 24 V DC, 6.8 mA,…
رقم القطعة: NZ2GNS12A2-14DT_3659
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: NZ2GNS12A2-14DT_3659
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
NZ2GNS12A2-14DT - DC input: 12 points (single wiring) 6 points (double wiring), 24 V DC, 6.8 mA,…
| Basic information / Model name | NZ2GNS12A2-14DT |
|---|---|
| Basic information / Overview | DC input: 12 points (single wiring) 6 points (double wiring), 24 V DC, 6.8 mA, response time: 1...70 ms, 12 points/common, negative common, transistor output: single wiring is not possible, 2 points (double wiring), 24 V DC, 2 A/point, response time: 0.4 ms, 2 points/common, source + sink type, waterproof connector type |
| Basic information / Sales status | On sale |
| Listed / Series | Remote I/O |
| Listed / Model name | NZ2GNS12A2-14DT |
| Weight | 0.52 kg |
| Basic information / Conformance standard | UL cUL CE(EMC) CE(Machinery) CE(RoHS) IEC 61508 EN ISO 13849-1 KC(EMC) |
| Shock resistance | Compliant with JIS B 3502 and IEC 61131-2 (147 m/s2, 3 times each in 3 directions X, Y, Z) |
| Operating atmosphere | No corrosive gases, flammable gases, less conductive dust |
| Operating altitude | 0...2000 m |
| Installation location | Inside a control panel |
| Overvoltage category | II or less |
| Pollution degree | 2 or less |
| Insulation resistance | Between all DC external terminals and ground: 10 MΩ or higher by 500 V DC insulation resistance tester |
| Operating ambient temperature | 0...55 ˚C |
| Storage ambient temperature | -25...75 ˚C |
| Operating ambient humidity | Compliant with IP67 |
| Storage ambient humidity | 5...95 %RH, non-condensing |
| Network topology | Line topology, star topology (Coexistence of line topology and star topology is possible.), and ring topology |
| Listed / Outline | DC input: 12 points (single wiring) 6 points (double wiring), 24 V DC, 6.8 mA, response time: 1...70 ms, 12 points/common, negative common, transistor output: single wiring is not possible, 2 points (double wiring), 24 V DC, 2 A/point, response time: 0.4 ms, 2 points/common, source + sink type, waterproof connector type |
| Input type | DC input (negative common type) |
| Output type | Transistor output (source + sink type) |
| Dielectric withstand voltage | Between all DC external terminals and ground: 500 V AC for 1 minute |
| External dimensions / Height | 238 mm |
| External dimensions / Width | 63 mm |
| External dimensions / Depth | 49 mm |
| Vibration resistance / Compliant with .. d IEC 61131-2 / Under intermittent vibration ~62dc24 | Frequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s2 Sweep count: 10 times each in X, Y, Z directions |
| Vibration resistance / Compliant with .. and IEC 61131-2 / Under continuous vibration ~d68864 | Frequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s2 |
| Equipment class | Class III |
| Listed / Large categories | Safety I/O |
| Listed / Medium categories | I/O |
| External interface | Communication part: M12 waterproof connector, 8 pins, female, X-code Module power supply part: M12 waterproof connector, 5 pins, male, female, L-code I/O part: M12 waterproof connector, 5 pins, female, A-code |
| CC-Link IE TSN Class | CC-Link IE TSN Class B (factory default) CC-Link IE TSN Class A |
| Multicast filter | Available |
| Number of input points | 12 points (single wiring) 6 points (double wiring) |
| Rated input voltage | 24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC) |
| Rated input current | 6.8 mA TYP. (24 V DC) |
| Maximum number of simultaneous input points | 100 % |
| Station type | Remote station |
| ON voltage/ON current | 11 V DC or more/4 mA or more |
| OFF voltage/OFF current | 5 V DC or less/1.5 mA or less |
| Input resistance | 3.2 kΩ |
| Input common terminal arrangement | 12 points/common |
| Protection degree | IP67 |
| CC-Link IE TSN protocol version / CC-Link IE TSN Class B | CC-Link IE TSN Protocol version 1.0 CC-Link IE TSN Protocol version 2.0 |
| CC-Link IE TSN protocol version / CC-Link IE TSN Class A | CC-Link IE TSN Protocol version 2.0 |
| Maximum response time for time-managed polling / CC-Link IE TSN Class A | 512 µs |
| Cyclic transmission / RX/RY points | 16 points |
| Cyclic transmission / RWr/RWw points | 20 points |
| Module power supply / Voltage | 24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC) |
| Module power supply / Current | 260 mA |
| Listed / Small categories | DC input/transistor output |
| Number of output points | 2 points (double wiring) (single wiring not possible) |
| Rated load voltage | 24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC) |
| Maximum load current | 4 A/point (Y0+, Y0-), 2 A/point (Y1+, Y1-), 6 A/common |
| Maximum inrush current | Current is limited by the overload protection function. |
| Leakage current at OFF | 0.1 mA or less |
| Maximum voltage drop at ON | 1.0 V DC or less |
| Surge suppressor | Zener diode |
| Output common terminal arrangement | 2 points/common |
| Protection function | Limited current when detecting overcurrent: 4.4...5.2 A/point |
| Input circuit response time / OFF to ON | 0.4 ms or less (24 V DC) |
| Output circuit response time / OFF to ON | 0.4 ms or less (24 V DC) |
| Input circuit response time / ON to OFF | 0.4 ms or less (24 V DC) |
| Output circuit response time / ON to OFF | 0.4 ms or less (24 V DC) |
| Safety remote station refresh response processing time | Safety remote station safety cycle time + Communication path response time |
| Input response time of safety remote station | Input circuit response time + Input response time (1 ms, 1.5 ms, 5 ms, 10 ms (factory default), 20 ms, 50 ms, 70 ms) |
| Output response time of safety remote station | Output circuit response time |
| Cyclic transmission / SA\X/SA\Y points | SA\X: 32 points SA\Y: 32 points |
| Module power supply / Protection function | Module power supply overvoltage protection function, module power supply overcurrent protection function |
| Module power supply / Fuse | 1.6 A (not replaceable), 7 A (not replaceable) |
| Safety remote station safety cycle time | 2.0 ms |
| Communication path response time | 0.3 ms |
| Load power supply and external power supply for output part / Voltage | 24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC) |
| Load power supply and external power supply for output part / Current | 40 mA |
| Load power supply and external power supply for output part / Protection function | External power supply overvoltage protection function |
| Power supply current for input device | 0.4 A/terminal |
Mitsubishi Electric
اطلب عرض سعر

Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر
Mitsubishi Electric
اطلب عرض سعر