John Deere

75 P-Tier Mid-Size Excavator

Name: 75 P-Tier Mid-Size Excavator
Brand: John Deere
SKU: JOHNDEERE-8240FF

رقم القطعة: JOHNDEERE-8240FF

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

75 P-Tier Mid-Size Excavator

المواصفات

Displacement	3.3 L (202 cu. in.)
Fuel Tank	125 L (33 gal.)
Engine Oil With Filter	12.3 L (3.2 gal.)
No derating is required up to	3050-m (10,000 ft.) altitude. Specifications and design subject to change without notice. Wherever applicable, specifications
Model	75 P-Tier
Base Code	8240FF
Division	construction-equipment
Product Family	excavators
System Relief Pressure	4300 kPa (624 psi)
Off-Level Capacity	70% (35 deg.)
Low	3.1 km/h (1.9 mph)
High	5.0 km/h (3.1 mph)
Maximum Rated Flow	20 L/m (5.3 gpm)
Arm (1)	95 mm (3.7 in.) 60 mm (2.4 in.) 900 mm (35.4 in.)
Bucket (1)	85 mm (3.3 in.) 55 mm (2.2 in.) 730 mm (28.7 in.)
Cooling System	13.1 L (3.5 gal.)
Hydraulic Tank	52 L (14 gal.)
Hydraulic System	100 L (26 gal.)
1-Piece Boom (with arm cylinder)	485 kg (1,069 lb.)
Arm Length	2.12 m (6 ft. 11 in.)
A Maximum Reach	6.87 m (22 ft. 6 in.)
B Maximum Digging Depth	4.65 m (15 ft. 3 in.)
C Maximum Cutting Height	7.58 m (24 ft. 10 in.)
D Maximum Dumping Height	5.48 m (18 ft. 0 in.)
E Minimum Swing Radius	2.12 m (6 ft. 11 in.)
A Overall Length	6.32 m (20 ft. 9 in.)
H Cab Height	2.52 m (8 ft. 3 in.) F
Blade Height	472 mm (19 in.)
1.5 m (5 ft.)	3.0 m (10 ft.) 4.5 m (15 ft.)
With	75-kg (165 lb.) Operator, Oil, Water, Full Fuel Tank, 3.67-m (12 ft. 0 in.) Boom, and 2.12-m (6 ft. 11 in.) Arm
Deere	2.12-m (6 ft. 11 in.) Arm
2,000	2,200 2,600 3,200 lb./cu. yd. 1,600 3,400 1,200 1,400 1,800 2,400 2,800 3,000 3,600
Swing Speed	10.1 rpm
J Upperstructure Width	2.35 m (7 ft. 9 in.)
G Counterweight Clearance	0.72 m (28 in.)
I Ground Clearance	360 mm (14 in.)
Counterweight, Standard	1165 kg (2,568 lb.)
Net Power (ISO 14396)	50.4 kW (67.6 hp) at 2,000 rpm
Maximum Pump Flow 2 x 72 +	56 L/m (2 x 19 + 15 gpm)
Maximum Pressure (1 pump)*	3,000 psi (207 bar / 20.7 MPa)
Maximum Flow (2 pump)	35.2 gpm (133.3 lpm)
Maximum Pressure (2 pump)	3,000 psi (207 bar / 20.7 MPa)
Implement Circuits	28 000 kPa (4,061 psi)
Travel Circuits	31 600 kPa (4,583 psi)
Swing Circuits	26 100 kPa (3,785 psi)
Boom (1)	115 mm (4.5 in.) 70 mm (2.8 in.) 885 mm (34.8 in.)
Swing Torque	16 600 Nm (12,244 lb.-ft.)
450-mm (18 in.) Rubber Crawler Pads	37 kPa (5.4 psi)
600-mm (24 in.) Triple Semi-Grouser Shoes	29 kPa (4.2 psi)
Propel Gearbox (each)	1.2 L (1.3 qt.)
2.12-m (6 ft.	11 in.) Arm With Bucket Cylinder 282 kg (622 lb.)
Boom Lift Cylinders (2), Total Weight	178 kg (392 lb.)
F Tail-Swing Radius	1.39 m (4 ft. 7 in.)
B Overall Height in Transport Position	2.73 m (8 ft. 11 in.)
D Rear-End Length/Swing Radius	1.39 m (4 ft. 7 in.)
E Distance Between Idler/Sprocket Centerline	2.30 m (7 ft. 6 in.)
F Undercarriage Length	2.90 m (9 ft. 6 in.)
K Gauge Width	1.75 m (5 ft. 9 in.)
L Blade Lift Height	370 mm (15 in.)
M Blade Cut Below Grade	290 mm (11 in.) N
N Blade Lift Angle	27 deg.
Type Bucket Bucket Width Bucket Capacity Bucket Weight Force (ISO)	2.12 m (6 ft. 11 in.) Bucket Tip Radius of Teeth
O Auto-idle system O Counterweight,	1165 kg (2,568 lb.) O Hydraulic warm-up control
protective net O Arm,	2.12 m (6 ft. 11 in.) engine air cleaner restriction indicator
O Spring-applied, hydraulically released O Coat hook V Seat belt,	76 mm (3 in.), non-retractable
V Triple semi-grouser shoes,	600 mm O O Blade-type multi-fused circuits
V Rubber crawler pads,	450 mm (18 in.) O Right rear left 270-deg. camera system
750-mm (30 in.),	211-kg (465 lb.) bucket; 2.12-m (6 ft. 11 in.) arm; 1165-kg (2,568 lb.) counterweight; full fuel tank; and 75-kg (165 lb.) operator.