D51PXi-24
رقم القطعة: KOMATSU-D51PXI-24
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
D51PXi-24
المواصفات
| Horsepower (HP) | 131 HP @ 2,200 rpm |
|---|---|
| Horsepower (kW) | 98 kW @ 2 200 rpm |
| Control valve | 3-spool control valve for power angle tilt dozer |
| Operating weight (kg) | 14 260 |
| Operating weight (lbs) | 31,438 |
| Blade capacity (m^3) | 3.36 |
| Blade capacity (yd^3) | 4.4 |
| Suspension | Rigid type |
| Track roller frame | Monocoque, large section, durable construction |
| Rollers and idlers | Lubricated track rollers |
| Type of shoes (standard) | Single grouser |
| Number of track rollers (each side) | 7 |
| Number of shoes (each side) | 44 |
| Sealed and lubricated track | Track tension is easily adjusted with grease gun |
| Grouser height (mm) | 55 |
| Grouser height (in) | 2.2 |
| Shoe width (standard)(in) | 28 |
| Shoe width (standard)(mm) | 710 |
| Ground contact area (ft2) | 42 |
| Ground contact area (cm^2) | 38 980 |
| Ground pressure (with standard shoe)(ISO 16754)(psi) | 4.64 |
| Ground pressure (with standard shoe)(ISO 16754)(kg/cm^2) | 0.33 |
| Ground pressure (with standard shoe)(ISO 16754)(kpa) | 32.0 |
| Track gauge (mm) | 1 880 |
| Track gauge (ft) | 6 ft. 2 in |
| Length of track on ground (ft) | 9 ft. 0 in |
| Length of track on ground (mm) | 2 745 |
| Engine model | Komatsu SAA4D107E-3* |
| Dozers type | 4-cycle, water-cooled, direct injection |
| Aspiration | Variable geometry, water-cooled, turbocharged, air-to-air aftercooled |
| Number of cylinders | 4 |
| Bore x stroke (in) | 4.21 x 4.88 |
| Bore x stroke (mm) | 107 x 124 |
| Piston displacement (L) | 4.5 |
| Piston displacement (in^3) | 275 |
| Governor | All-speed, electronic |
| Footnote | *EPA Tier 4 Final emissions certified |
| SAEJ1995 - Gross (kW) | 99 |
| SAEJ1995 - Gross (HP) | 133 |
| ISO 9249 / SAE J1349 - Net (HP) | 131 |
| ISO 9249 / SAE J1349 - Gross (kW) | 98 |
| Rated rpm | 2,200 |
| Fan drive type | Hydraulic |
| Filter | Full-flow |
| Method | Gear pump, force lubrication |
| Operator weight (approximate) | Operating weight: Including Power Angle Tilt (PAT) dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank. |
| Tractor weight (kg) | 12 470 |
| Tractor weight (lbs) | 27,492 |
| Tractor weight inclusions | Including ROPS cab, U frame for Power Angle Tilt (PAT) dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. |
| Final drive features | In-shoe mounted, axial-piston-type travel motors, with integrated two-stage planetary gear reduction. Compact, in-shoe mount reduces risk of damage by debris. Bolt-on sprocket ring with triple labyrinth seal design. |
| Hydrostatic transmission features | Dual-path, hydrostatic transmission provides infinite speed changes up to 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch. |
| Hydrostatic transmission footnote | *Quick shift speeds are adjustable in the monitor. |
| 1st forward (kph) | 0 - 3.4 |
| 1st forward (mph) | 0 - 2.1 |
| 1st reverse (mph) | 0 - 2.5 |
| 1st reverse (kph) | 0 - 4.1 |
| 2nd forward (kph) | 0 - 5.6 |
| 2nd forward (mph) | 0 - 3.5 |
| 2nd reverse (mph) | 0 - 4.0 |
| 2nd reverse (kph) | 0 - 6.5 |
| 3rd forward (mph) | 0 - 5.6 |
| 3rd forward (kph) | 0 - 9.0 |
| 3rd reverse (mph) | 0 - 5.6 |
| 3rd reverse (kph) | 0 - 9.0 |
| Travel speed forward (variable mode) (kph) | 0 - 9.0 |
| Travel speed forward (variable mode) (mph) | 0 - 5.6 |
| Travel speed reverse (variable mode) (mph) | 0 - 5.6 |
| Travel speed reverse (variable mode) (kph) | 0 - 9.0 |
| Fuel tank (US gal) | 71.3 |
| Fuel tank (L) | 270 |
| Diesel Exhaust Fluid (DEF) tank (L) | 20.5 |
| Diesel Exhaust Fluid (DEF) tank (US gal) | 5.4 |
| Coolant (US gal) | 9.8 |
| Coolant (L) | 37 |
| Engine oil (L) | 16 |
| Engine oil (US gal) | 4.2 |
| Final drive (US gal) | 1.5 |
| Final drive (L) | 5.5 |
| Hydraulic tank (L) | 64 |
| Hydraulic tank (US gal) | 17 |
| Steering system features | Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it back reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation. Hydrostatic Transmission (HST) provides smooth, powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed. |
| Minimum turning radius (in) | 94* |
| Minimum turning radius (m) | 2.4* |
| Steering system footnote | *As measured by track marks on the ground at pivot turn. |
| Hydraulic fan at maximum speed - net (HP) | 122 |
| Hydraulic fan at maximum speed - net (kW) | 91 |
| Hydraulic system features | Closed-Center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation. |
| Hydraulic control unit (U.S. gal/min) | All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 26 U.S. gal/min at rated engine rpm. |
| Hydraulic control unit (ltr/min) | All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 97 ltr/min at rated engine rpm. |
| Relief valve setting (kg/cm^2) | 280 |
| Relief valve setting (psi) | 3,974 |
| Relief valve setting (MPa) | 27.4 |
| Power angle tilt dozer (L) | 64 |
| Power angle tilt dozer (US gal) | 17 |
| Blade lift | Raise, hold, lower, and float |
| Blade tilt | Right, hold, and left |
| Blade angle | Right, hold, and left |
| Ripper lift | Raise, hold and lower |
| Blade tilt /1 (in) | 4 |
| Blade tilt /1 (mm) | 100 |
| Blade lift / 2 (mm) | 90 |
| Blade lift / 2 (in) | 3.5 |
| Blade angle / 2 (mm) | 90 |
| Blade angle / 2 (in) | 3.5 |
| Hydraulic cylinders | Double-acting, piston type |
