8RX 490 Tractor
رقم القطعة: JOHNDEERE-8510RW
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
8RX 490 Tractor
المواصفات
| Model | 8RX 490 |
|---|---|
| Base Code | 8510RW |
| Division | tractors |
| Product Family | row-crop-4wd-tractors |
| ENGINE / Displacement | 827 cu in (13.6 L) |
| ENGINE / Engine Model | JD14 |
| ENGINE / Rated speed | 1,900 rpm |
| PTO torque rise | 41% |
| INTEGRATED TECHNOLOGY / Integrated AutoTrac™ | Standard |
| CAPACITIES / DEF tank | 18.2 gal (69 L) |
| WEIGHT CAPACITIES / Max ballast level | 50,706 lb (23,000 kg) |
| WEIGHT CAPACITIES / Max permissible weight | 62,831 lb (28,500 kg) |
| ENGINE / Aspiration | Single wastegated turbocharger air-to-air aftercooling and cooled exhaust gas recirculation |
| CAPACITIES / Fuel tank | 296.6 gal (1123 L) |
| DRAWBAR / REAR POWER TAKE OFF (PTO) | Independent, electrohydraulic switched via oil-cooled multi-disc clutch |
| ELECTRICAL SYSTEM / Alternator/Battery | Standard: 250 A / 12 V, Available: 330 A / 12 V |
| ELECTRICAL SYSTEM / Total cold cranking amps | 3 X 950 CCA : 2,850 CCA Total |
| REAR AXLES / Drive type | Positive |
| REAR AXLES / Track width | 21 in (533 mm), 24 in (610 mm), 30 in (762 mm) |
| REAR AXLES / HYDRAULIC SYSTEM | Closed-center, pressure/flow compensated system with load sensing |
| REAR AXLES / Tread spacing | Factory: 80 in (2032 mm), 88 in (2235.2 mm), 120 in (3048 mm) Aftermarket: 132 in (3352.8 mm), 136 in (3454.4), 144 in (3657.6 mm) |
| REAR AXLES / FRONT AXLE | 1900 Series MFWD |
| WHEELBASE / MFWD | 130.1 in (3305 mm) |
| Rated PTO power (hp SAE) at rated engine speed 1 | 400 hp (298 kW) |
| Rated 1300 PTO power (hp SAE) at rated PTO speed | 434 hp (324 kW) |
| Rated engine power PS (hp ISO) at rated engine speed (ECE-R120) 2 | 490 hp (360 kW) |
| Max engine power PS (hp ISO) at max engine power speed (ECE-R120) 2 | 539 hp (396 kW) |
| Intelligent Power Management (available), additional engine horsepower PS (hp ISO) at 1,900 rpm (rat | 40 hp (29 kW) |
| Peak Power Intelligent Power Management (available), additional engine horsepower PS (hp ISO) at 1,7 | 40 hp (29 kW) |
| Max engine power PS (hp ISO) with boost at max engine power speed (ECE-R120) 2 | 579 hp (426 kW) |
| Engine peak torque (Nm) at max torque engine speed 2 | 2445 Nm |
| Engine power bulge 2 | 10% |
| ENGINE / Manufacturer | John Deere |
| FUEL SYSTEM / Required fuel type | Ultra low sulfur diesel (B30 diesel compatible) |
| TRANSMISSION / eAutoPowr™ EVT 40K | Available (Variable forward: 0.05 - 40 km/h, 40 km/h @ min erpm of 1200 Varable reverse: 0.05 - 30 km/h)3 |
| ELECTRIC POWER GENERATION (Optional) / Power output | 100 kW |
| ELECTRIC POWER GENERATION (Optional) / Voltage | 480 VAC / 700 VDC |
| DRAWBAR / Category 5 with Category 4 insert | NA |
| DRAWBAR / 1,000 rpm 20-spline 45 mm (1-3/4 in) PTO | Standard |
| DRAWBAR / 1,000 rpm / 1,000E rpm 20-spline 45 mm (1-3/4 in) and 1,300 rpm 22-spline 57.5mm (2-1/4 in | Available |
| 3-POINT HITCH - FRONT / Lift capacity through full range 24 in (610 mm) in front of the coupler (Val | 10,710 lb (4860 kg) |
| INTEGRATED TECHNOLOGY / Connectivity subscription | JDLink connectivity 4 can be enabled in John Deere Operations Center™ |
| REAR AXLES / STEERING | Tilt & telescope steering with memory function, 345-mm steering wheel (all options) |
| REAR AXLES / Reactive Command Steering (RCS) w/ electronic back-up pump | Standard: Variable ratio 15:1 to 20:1 (3.1-5.0 turns lock-to-lock) w/ tactile feedback, includes return-to-center capability |
| REAR AXLES / Rear selective control valves with 1/2 in (12.7 mm) ISO couplers | Standard: 5; Available: 4 or 6 |
| REAR AXLES / Rear selective control valves with 3/4 in (19.05 mm) and 1/2 in (12.7 mm) ISO couplers | Available: 6 (SCV 1: 3/4 in coupler, SCV 2-6: 1/2 in couplers) |
| REAR AXLES / Dual hydraulic pump | 84 gpm (319.8 lpm) |
| REAR AXLES / High flow dual hydraulic pump | 110 gpm (418.2 lpm) |
| REAR AXLES / Available flow at a single selective control valve - 1/2 in (12.7 mm) coupler | 35 gpm (132 lpm) |
| REAR AXLES / Available flow at a single selective control valve with High-Flow - 3/4 in (19.05 mm) c | 45 gpm (170 lpm) |
| 3-POINT HITCH - REAR / Category 4N/3 w/ Quick-Coupler sway blocks | Standard: 20,000 lb (9072 kg), Available: 24,000 lb (10,886 kg) |
| 3-POINT HITCH - REAR / Category 4N/3 w/ ball/hook ends and sway blocks | Standard: 19,841 lb (9000 kg) |
| 3-POINT HITCH - REAR / Category 4N/3 w/ ball/hook ends and deluxe sway stabilizers | Standard: 19,841 lb (9000 kg), Available: 24,000 lb (10,886 kg) |
| DRAWBAR / Category 5 | 19,000 lb (8636 kg) max vertical load |
| AVERAGE BASE WEIGHT / eVT, 21 in front, 21 in rear, 120 in spacing, 85 gpm dual pumps, 5 SCVs, PTO, | 48,389 lb (21,949 kg) |
| ExactRate TM TRACTOR TANKS / Capacity | 1,000 gal (3,785 L) |
