Caterpillar

150 Motor Grader

Name: 150 Motor Grader
Brand: Caterpillar
SKU: CAT-125720

رقم القطعة: CAT-125720

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

150 Motor Grader

المواصفات

Engine Model	Cat® C9.3
Bore	115 mm
Stroke	149 mm
Displacement	9.3 l
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.994 tons).
Cooling System	57 l
Transmission	APECS, Direct Drive, Powershift
Brakes	ISO 3450
Steering	ISO 5010
Model	150 / 150 AWD JOY
Product Page	https://www.cat.com/en_US/products/new/equipment/motor-graders/motor-graders/125720.html
Caterpillar Category	Motor Graders
Caterpillar Category Path	Products > Equipment > Motor Graders > Motor Graders > 150 150 AWD JOY
Caterpillar Product Family	equipment
Caterpillar Product Page ID	125720
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20250116-d1938-83bb8
Height	506 mm
Emissions	U.S. EPA Tier 4 Final/EU Stage V
Forward - 4th	11 km/h
Forward - 2nd	5.5 km/h
Reverse - 1st	3.2 km/h
Reverse - 3rd	8.7 km/h
Reverse - 2nd	6 km/h
Forward - 3rd	8 km/h
Reverse - 4th	13.5 km/h
Forward - 1st	4.1 km/h
Pump Type	Variable Piston
Forward - 6th	23.3 km/h
Forward - 5th	17.1 km/h
Engine Oil	30 l
Width	201 mm
Number of Cylinders	6
Standard Capability	43 °C
Speed at Rated Power	2,000 rpm
Operating Weight - Typically Equipped	19935 kg
Torque Rise	39%
Blade Width	3.7 m
Base Power (1st Gear) - Net - Metric	149 kW
Maximum Torque - VHP Plus	1247 N·m
Arc Radius	413 mm
Maximum Depth of Cut	715 mm
Throat Clearance	166 mm
Maximum Lift Above Ground	480 mm
VHP Plus - Gear - Net Power - Forward 4th	172 kW
VHP Plus - Gear - Net Power - Forward 8th	188 kW
Gross Vehicle Weight - Base* - Total	17323 kg
VHP Plus Range - Net - Metric	149-188 kW (202-255 hp)
Gross Vehicle Weight - Base* - Front Axle	4355 kg
Derating Altitude	3050 m
VHP Plus - Gear - Net Power - Forward 2nd	156 kW
VHP Plus - Gear - Net Power - Forward 3rd	164 kW
High - Ambient Capability	50 °C
VHP Plus - Gear - Net Power - Forward 1st	149 kW
VHP Plus - Gear - Net Power - Reverse 2nd	156 kW
Gross Vehicle Weight - Base* - Rear Axle	12968 kg
Cutting Edge Width	152 mm
VHP Plus - Gear - Net Power - Forward 5th	176 kW
End Bit - Width	152 mm
VHP Plus - Gear - Net Power - Reverse 1st	149 kW
Blade Pull* - Base GVW	11672 kg
Net Power Range (Tier 4)	149 kW
VHP Plus - Gear - Net Power - Forward 7th	184 kW
Cutting Edge Thickness	16 mm
Blade Pull* - Maximum GVW	15541 kg
VHP Plus - Gear - Net Power - Forward 6th	180 kW
End Bit - Thickness	16 mm
VHP Plus - Gear - Net Power - Reverse 3rd-6th	164 kW
Fuel Capacity	394 l
Moldboard - Blade Width	3.7 m
VHP Plus Range - Net	149-188 kW (200-252 hp)
High Ambient - Fan Speed - Standard	1,400 rpm
Moldboard - Height	610 mm
Hydraulic System - Tank	64 l
Hydraulic System - Total	100 l
Circle Centershift - Left	695 mm
High Ambient - Fan Speed - Maximum	1,550 rpm
Moldboard - Thickness	22 mm
Transmission - Differential - Final Drives	70 l
Circle Centershift - Right	728 mm
Tandem Housing - Each	76 l
Blade Down Pressure - Base GVW	7475 kg
High Ambient - Fan Speed - Minimum	500 rpm
Blade Tip Range - Backward	5°
Gross Vehicle Weight - Maximum - Front Axle	7745 kg
Blade Down Pressure - Maximum GVW	13294 kg
Front Wheel Spindle Bearing Housing	0.5 l
Maximum Shoulder Reach Outside of Tires - Right	1978 mm
Gross Vehicle Weight - Maximum - Rear Axle	17268 kg
Circle Drive Housing	7 l
Moldboard Sideshift - Right	660 mm
Operating Weight - Typically Equipped - Front Axle	5692 kg
Forward/Reverse Gears	8 Forward/6 Reverse
Height - Top of Cab	3308 mm
Moldboard Sideshift - Left	510 mm
Operating Weight - Typically Equipped - Rear Axle	14243 kg
Brakes - Parking	Multiple Oil Disc
Length - Counterweight to Ripper	10136 mm
Maximum Shoulder Reach Outside of Tires - Left	1790 mm
Brakes - Secondary	Dual Circuit
Brakes - Service	Multiple Oil Disc
Gross Vehicle Weight - Maximum - Total	25013 kg
Blade Tip Range - Forward	40°
Ground Clearance - Rear Axle	339 mm
Circuit Type	Parallel
Operating Weight - Typically Equipped - Total	19935 kg
Maximum Blade Position Angle	90°
Front Axle - Wheel Lean - Left/Right	18°
Maximum System Pressure	24150 kPa
Front Frame Structure - Height	321 mm
Top Speed - Forward	46.6 km/h
Front Axle - Total Oscillation per Side	32°
Standby Pressure	6100 kPa
Front Frame Structure - Width	305 mm
Top Speed - Reverse	36.8 km/h
Pump Output*	210 L/min
Front Axle - Height to Center	596 mm
Turning Radius - Outside Front Tires	7.8 m
Steering Range - Left/Right	50°
Forward - 8th	46.6 km/h
Front-Top/Bottom Plate - Thickness	22 mm
Forward - 7th	32 km/h
Articulation Angle - Left/Right	20°
Front-Top/Bottom Plate - Width	305 mm
Reverse - 6th	36.8 km/h
Reverse - 5th	25.3 km/h
Drawbar - Height	152 mm
Diesel Exhaust Fluid	22 l
Brakes - Service - Surface Area	23000 cm²
Drawbar - Width	76.2 mm
Height - Front Axle Center	596 mm
Circle - Diameter	1530 mm
Drawbar - Thickness	12.7 mm
Circle - Blade Beam Thickness	40 mm
Height - Top of Cylinders	3040 mm
Reservoir Tank Capacity	64 l
Circle - Height	138 mm
Height - Exhaust Stack	3256 mm
Sidewall Thickness - Outer	18 mm
Tandem Oscillation - Front Up	15°
Ripping Depth - Maximum	426 mm
Ripper Shank Holder Spacing	533 mm
Sidewall Thickness - Inner	16 mm
Ripper Shank Holders	5
Length - Front Tire to Rear of Machine	8912 mm
Length - Between Tandem Axles	1523 mm
Tandem Oscillation - Front Down	25°
Penetration Force	9440 kg
Machine Length Increase, Beam Raised	1031 mm
Width - Tire Center Lines	2140 mm
Pry-Out Force	12607 kg
Mid, V-Type - Working Width	1184 mm
Rear - Scarifying Depth, Maximum	426 mm
Sound	ISO 6394; ISO 6395
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing	116 mm
Mid, V-Type - Scarifier Shank Holders	11
Drive Chain Pitch	50.8 mm
Mid, V-Type - Scarifier Shank Holder Spacing	116 mm
Wheel Axle Spacing	1523 mm
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum	467 mm
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders	5 or 11
Mid, V-Type - Scarifying Depth, Maximum	292 mm
Front, V-Type, 5 or 11 Tooth - Working Width	1031 mm
Front, V-Type - Working Width	1205 mm
Rear - Scarifier Shank Holders	9
Rear - Working Width	2133 mm
Rear - Scarifier Shank Holder Spacing	267 mm
ROPS/FOPS	ISO 3471/ISO 3449
Width - Outside Front Tires	2511 mm
Length - Front Axle to Moldboard	2552 mm
Width - Outside Rear Tires	2511 mm
Length - Front Axle to Mid Tandem	6123 mm