Caterpillar

18 Motor Grader

Name: 18 Motor Grader
Brand: Caterpillar
SKU: CAT-1000007681

رقم القطعة: CAT-1000007681

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

18 Motor Grader

المواصفات

Engine Model	Cat® C13
Bore	130 mm
Stroke	157 mm
Displacement	12.5 l
Note (1)	*No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt.
Note (2)	**Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab.
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonnes (3.152 tons).
Note	*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
Cooling System	70 l
DEF Tank	16 l
Transmission	Direct drive, power shift, countershaft
Brakes	ISO 3450: 2011
Steering	ISO 5010: 2007
Model	18
Product Page	https://www.cat.com/en_US/products/new/equipment/motor-graders/motor-graders/1000007681.html
Caterpillar Category	Motor Graders
Caterpillar Category Path	Products > Equipment > Motor Graders > Motor Graders > 18
Caterpillar Product Family	equipment
Caterpillar Product Page ID	1000007681
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20150821-30347-07847
Height	787 mm
Forward - 4th	12.3 km/h
Forward - 2nd	6.1 km/h
Reverse - 1st	3.6 km/h
Reverse - 3rd	9.7 km/h
Reverse - 2nd	6.6 km/h
Forward - 3rd	8.9 km/h
Reverse - 4th	15 km/h
Forward - 1st	4.5 km/h
Pump Type	Variable piston
Forward - 6th	25.8 km/h
Forward - 5th	19 km/h
Engine Oil	36 l
Width	5.5 m
Hydraulic System — Note	*Pump output measured at 2,150 rpm.
Number of Cylinders	6
Base Power (1st Gear) - Net	227 kW
Speed at Rated Power	2,000 rpm
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	3711 m
Operating Weight - Typically Equipped	33713 kg
Standard - Ambient Capability	50 °C
Blade Width	5.5 m
Base Power (1st Gear) - Net - Metric	227 kW
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	1721 N·m
VHP Range - Net	227-266 kW (304-357 hp)
Arc Radius	413 mm
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	1721 N·m
Maximum Depth of Cut	470 mm
Throat Clearance	126 mm
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	3954 m
Emissions (2)	Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards
Maximum Lift Above Ground	400 mm
Standard - Fan Speed - Minimum	550 rpm
Standard - Fan Speed - Maximum	1,450 rpm
Emissions (1)	U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	38%
Gross Vehicle Weight - Base* - Total	32794 kg
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)	40%
VHP Range - Net - Metric	227-266 kW (309-362 hp)
Gross Vehicle Weight - Base* - Front Axle	8998 kg
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)	1771 N·m
Gross Vehicle Weight - Typically Equipped - Total	33713 kg
Emissions (3)	Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)	3810 m
Gross Vehicle Weight - Typically Equipped - Rear Axle	24417 kg
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	38%
Gross Vehicle Weight - Typically Equipped - Front Axle	9296 kg
Optimized VHP Range - Net	227-266 kW (304-357 hp)
Gross Vehicle Weight - Base* - Rear Axle	23796 kg
Cutting Edge Width	254 mm
Thickness	25 mm
Down Force - Maximum GVW	19895 kg
End Bit - Width	152 mm
Blade Pull* - Base GVW	21417 kg
Cutting Edge Thickness	35 mm
Blade Pull* - Maximum GVW	23985 kg
Down Force - Base GVW	15426 kg
End Bit - Thickness	19 mm
Fuel Capacity	496 l
Hydraulic System - Tank	70 l
Hydraulic System - Total	146 l
Circle Centershift - Left	690 mm
Transmission - Differential - Final Drives	98.5 l
Circle Centershift - Right	560 mm
Tandem Housing - Each	129 l
Blade Tip Range - Backward	5°
Front Wheel Spindle Bearing Housing	0.9 l
Maximum Shoulder Reach Outside of Tires - Right	2605 mm
Circle Drive Housing	10 l
Moldboard Sideshift - Right	790 mm
Forward/Reverse Gears	8 Forward/6 Reverse
Height - Top of Cab	3746 mm
Moldboard Sideshift - Left	740 mm
Brakes - Dynamic Brake Torque per Wheel	36701 N·m
Brakes - Parking	Spring applied, hydraulically released
Length - Counterweight to Ripper	12051 mm
Maximum Shoulder Reach Outside of Tires - Left	2605 mm
Brakes - Secondary	Oil-actuated, oil-disc
Brakes - Service	Oil-actuated, oil disc
Blade Tip Range - Forward	40°
Ground Clearance - Rear Axle	423 mm
Circuit Type	Electro-hydraulic load sensing, closed center
Maximum Blade Position Angle	65°
Maximum System Pressure	24750 kPa
Front Frame Structure - Height	460 mm
Top Speed - Forward	51.7 km/h
Front Axle - Total Oscillation per Side	35°
Standby Pressure	5900 kPa
Front Frame Structure - Width	356 mm
Top Speed - Reverse	40.8 km/h
Pump Output*	280 L/min
Front Axle - Height to Center	670 mm
Turning Radius - Outside Front Tires	9.3 m
Steering Range - Left/Right	47.5°
Forward - 8th	51.7 km/h
Forward - 7th	35.5 km/h
Articulation Angle - Left/Right	20°
Reverse - 6th	40.8 km/h
Reverse - 5th	28 km/h
Drawbar - Height	203 mm
Operating Specifications — Note	Calculated with no slip and 23.5R25 L-3 tires.
Drawbar - Width	76 mm
Height - Front Axle Center	760 mm
Circle - Diameter	1822 mm
Front Frame Structure - Thickness	14 mm
Circle - Blade Beam Thickness	50 mm
Height - Top of Cylinders	3115 mm
Front Axle - Wheel Lean	18° Left/17° Right
Height - Exhaust Stack	3584 mm
Sidewall Thickness - Outer	22 mm
Tandem Oscillation - Front Up	15°
Ripping Depth - Maximum	452 mm
Sidewall Thickness - Inner	22 mm
Ripper Shank Holders	7
Length - Between Tandem Axles	1841 mm
Tandem Oscillation - Front Down	25°
Penetration Force	13749 kg
Machine Length Increase, Beam Raised	1610 mm
Width - Tire Center Lines	2703 mm
Tandems — Height	648 mm
Pry-Out Force	19822 kg
Tandems — Width	236 mm
Sound	ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008
Drive Chain Pitch	63.5 mm
Wheel Axle Spacing	1841 mm
Shank Holder Spacing - Minimum	445 mm
Shank Holder Spacing - Maximum	500 mm
Gross Vehicle Weight - Maximum Tested - Total	38500 kg
Gross Vehicle Weight - Maximum Tested - Rear Axle	26650 kg
ROPS/FOPS	ISO 3471: 2008/ISO 3449: 2005
Gross Vehicle Weight - Maximum Tested - Front Axle	11850 kg
Width - Outside Front Tires	3411 mm
Length - Front Axle to Moldboard	3066 mm
Width - Outside Rear Tires	3411 mm
Length - Front Axle to Mid Tandem	7365 mm
Length - Front Tire to Rear of Machine - Including Tow Hitch	10593 mm
Gear - Forward 1st	227 kW
Gear - Reverse 3rd-6th	232 kW
Gear - Forward 2nd	227 kW
Gear - Forward 8th	266 kW
Gear - Reverse 2nd	227 kW
Gear - Forward 3rd	232 kW
Gear - Forward 4th	239 kW
Gear - Forward 6th	251 kW
Gear - Forward 5th	244 kW
Gear - Reverse 1st	227 kW
Gear - Forward 7th	255 kW
Wheel Group - 19.5×25 MP (1)	Tires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group - 19.5×25 MP (2)	Tires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group - 19.5×25 MP (3)	Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (4)	Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (5)	Tires: 23.5R25 Michelin XLDD 2 Star L5