16 Motor Grader
رقم القطعة: CAT-1000005460
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
16 Motor Grader
المواصفات
| Engine Model | Cat® C13 |
|---|---|
| Bore | 130 mm |
| Stroke | 157 mm |
| Displacement | 12.5 l |
| Note (1) | *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. |
| Note (2) | **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonnes (3.152 tons). |
| Note | *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. |
| Cooling System | 70 l |
| DEF Tank | 16 l |
| Transmission | Direct drive, power shift, countershaft |
| Brakes | ISO 3450:2011 |
| Steering | ISO 5010:2007 |
| Model | 16 |
| Product Page | https://www.cat.com/en_US/products/new/equipment/motor-graders/motor-graders/1000005460.html |
| Caterpillar Category | Motor Graders |
| Caterpillar Category Path | Products > Equipment > Motor Graders > Motor Graders > 16 |
| Caterpillar Product Family | equipment |
| Caterpillar Product Page ID | 1000005460 |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20150619-33734-31756 |
| Height | 787 mm |
| Forward - 4th | 12.3 km/h |
| Forward - 2nd | 6.1 km/h |
| Reverse - 1st | 3.6 km/h |
| Reverse - 3rd | 9.7 km/h |
| Reverse - 2nd | 6.6 km/h |
| Forward - 3rd | 8.9 km/h |
| Reverse - 4th | 15 km/h |
| Forward - 1st | 4.5 km/h |
| Pump Type | Variable piston |
| Forward - 6th | 25.8 km/h |
| Forward - 5th | 19 km/h |
| Engine Oil | 36 l |
| Width | 4.9 m |
| Hydraulic System — Note | *Pump output measured at 2,150 rpm. |
| Number of Cylinders | 6 |
| Base Power (1st Gear) - Net | 216 kW |
| Speed at Rated Power | 2,000 rpm |
| Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent | 3711 m |
| Operating Weight - Typically Equipped | 32411 kg |
| Standard - Ambient Capability | 50 °C |
| Blade Width | 4.9 m |
| Base Power (1st Gear) - Net - Metric | 216 kW |
| Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent | 1721 N·m |
| VHP Range - Net | 216-259 kW (290-348 hp) |
| Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) | 1771 N·m |
| Arc Radius | 413 mm |
| Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent | 1721 N·m |
| Maximum Depth of Cut | 470 mm |
| Throat Clearance | 126 mm |
| Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent | 3954 m |
| Emissions (2) | Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country |
| Maximum Lift Above Ground | 400 mm |
| Standard - Fan Speed - Minimum | 550 rpm |
| Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) | 43% |
| Standard - Fan Speed - Maximum | 1,450 rpm |
| Emissions (1) | U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) |
| Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent | 39% |
| Gross Vehicle Weight - Base* - Total | 28816 kg |
| VHP Range - Net - Metric | 216-259 kW (294-353 hp) |
| Gross Vehicle Weight - Base* - Front Axle | 8134 kg |
| Gross Vehicle Weight - Typically Equipped - Total | 32411 kg |
| Emissions (3) | Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country |
| Gross Vehicle Weight - Typically Equipped - Rear Axle | 23678 kg |
| Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent | 39% |
| Gross Vehicle Weight - Typically Equipped - Front Axle | 8733 kg |
| Optimized VHP Range - Net | 216-259 kW (290-348 hp) |
| Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) | 3810 m |
| Gross Vehicle Weight - Base* - Rear Axle | 20682 kg |
| Cutting Edge Width | 203 mm |
| Thickness | 25 mm |
| Down Force - Maximum GVW | 19895 kg |
| End Bit - Width | 152 mm |
| Blade Pull* - Base GVW | 18615 kg |
| Cutting Edge Thickness | 25 mm |
| Blade Pull* - Maximum GVW | 23985 kg |
| Down Force - Base GVW | 13945 kg |
| End Bit - Thickness | 19 mm |
| Fuel Capacity | 496 l |
| Hydraulic System - Tank | 70 l |
| Hydraulic System - Total | 146 l |
| Circle Centershift - Left | 690 mm |
| Transmission - Differential - Final Drives | 98.5 l |
| Circle Centershift - Right | 560 mm |
| Tandem Housing - Each | 129 l |
| Blade Tip Range - Backward | 5° |
| Front Wheel Spindle Bearing Housing | 0.9 l |
| Maximum Shoulder Reach Outside of Tires - Right | 2311 mm |
| Circle Drive Housing | 10 l |
| Moldboard Sideshift - Right | 790 mm |
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Height - Top of Cab | 3719 mm |
| Moldboard Sideshift - Left | 740 mm |
| Brakes - Dynamic Brake Torque per Wheel | 36701 N·m |
| Brakes - Parking | Spring applied, hydraulically released |
| Length - Counterweight to Ripper | 12051 mm |
| Maximum Shoulder Reach Outside of Tires - Left | 2311 mm |
| Brakes - Secondary | Oil-actuated, oil-disc |
| Brakes - Service | Oil-actuated, oil disc |
| Blade Tip Range - Forward | 40° |
| Ground Clearance - Rear Axle | 396 mm |
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Maximum Blade Position Angle | 65° |
| Maximum System Pressure | 24750 kPa |
| Front Frame Structure - Height | 460 mm |
| Top Speed - Forward | 51.7 km/h |
| Front Axle - Total Oscillation per Side | 35° |
| Standby Pressure | 5900 kPa |
| Front Frame Structure - Width | 356 mm |
| Top Speed - Reverse | 40.8 km/h |
| Pump Output* | 280 L/min |
| Front Axle - Height to Center | 670 mm |
| Turning Radius - Outside Front Tires | 9.3 m |
| Steering Range - Left/Right | 47.5° |
| Forward - 8th | 51.7 km/h |
| Forward - 7th | 35.5 km/h |
| Articulation Angle - Left/Right | 20° |
| Reverse - 6th | 40.8 km/h |
| Reverse - 5th | 28 km/h |
| Drawbar - Height | 203 mm |
| Operating Specifications — Note | Calculated with no slip and 23.5 R25 L-3 tires. |
| Drawbar - Width | 76 mm |
| Height - Front Axle Center | 733 mm |
| Circle - Diameter | 1822 mm |
| Front Frame Structure - Thickness | 14 mm |
| Circle - Blade Beam Thickness | 50 mm |
| Height - Top of Cylinders | 3088 mm |
| Front Axle - Wheel Lean | 18° Left/17° Right |
| Height - Exhaust Stack | 3557 mm |
| Sidewall Thickness - Outer | 22 mm |
| Tandem Oscillation - Front Up | 15° |
| Ripping Depth - Maximum | 452 mm |
| Sidewall Thickness - Inner | 22 mm |
| Ripper Shank Holders | 7 |
| Length - Between Tandem Axles | 1841 mm |
| Tandem Oscillation - Front Down | 25° |
| Penetration Force | 13749 kg |
| Machine Length Increase, Beam Raised | 1610 mm |
| Width - Tire Center Lines | 2703 mm |
| Tandems — Height | 648 mm |
| Pry-Out Force | 19822 kg |
| Tandems — Width | 236 mm |
| Sound | ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 |
| Drive Chain Pitch | 63.5 mm |
| Wheel Axle Spacing | 1841 mm |
| Shank Holder Spacing - Minimum | 445 mm |
| Shank Holder Spacing - Maximum | 500 mm |
| Gross Vehicle Weight - Maximum Tested - Total | 38500 kg |
| Gross Vehicle Weight - Maximum Tested - Rear Axle | 26650 kg |
| ROPS/FOPS | ISO 3471:2008/ISO 3449:2005 |
| Gross Vehicle Weight - Maximum Tested - Front Axle | 11850 kg |
| Width - Outside Front Tires | 3411 mm |
| Length - Front Axle to Moldboard | 3066 mm |
| Width - Outside Rear Tires | 3411 mm |
| Length - Front Axle to Mid Tandem | 7365 mm |
| Length - Front Tire to Rear of Machine - Including Tow Hitch | 10593 mm |
| Standards — Note (1) | The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system. |
| Standards — Note (2) | The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system. |
| Gear - Forward 1st | 216 kW |
| Gear - Reverse 3rd-6th | 222 kW |
| Gear - Forward 2nd | 216 kW |
| Gear - Forward 8th | 259 kW |
| Gear - Reverse 2nd | 216 kW |
| Gear - Forward 3rd | 222 kW |
| Gear - Forward 4th | 227 kW |
| Gear - Forward 6th | 239 kW |
| Gear - Forward 5th | 232 kW |
| Gear - Reverse 1st | 216 kW |
| Gear - Forward 7th | 244 kW |
| Wheel Group - 19.5×25 MP (1) | Tires: 23.5R25 Bridgestone VKT 2 Star |
| Wheel Group - 19.5×25 MP (2) | Tires: 23.5R25 Bridgestone VKT 1 Star |
| Wheel Group - 19.5×25 MP (3) | Tires: 23.5R25 Bridgestone VJT 1 Star |
| Wheel Group - 19.5×25 MP (4) | Tires: 23.5R25 Michelin XHA 2 Star |
| Wheel Group - 19.5×25 MP (5) | Tires: 23.5R25 Michelin XLDD 2 Star L5 |
منتجات مشابهة
معدات ثقيلة وآليات
Caterpillar
18 Motor Grader
اطلب عرض سعر
Caterpillar
793 Mining Truck
اطلب عرض سعر
Caterpillar
16 Motor Grader
اطلب عرض سعر
Caterpillar
789 Next Generation
اطلب عرض سعر
Caterpillar
150 Motor Grader
اطلب عرض سعر
Caterpillar
797F Mining Truck
اطلب عرض سعر
Caterpillar
140/140 AWD Motor Grader
اطلب عرض سعر
Caterpillar
796 AC Electric Drive Mining Truck
اطلب عرض سعر