Cavex® Dewatering Hydrocyclone

Name: Cavex® Dewatering Hydrocyclone
Brand: Weir

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The Cavex® dewatering cyclone features the innovative laminar spiral inlet geometry design of the original Cavex® hydrocyclone range, but with additional accessories that allow it to create a dry and stackable product. The hydrocyclone is usually fitted on a boom that can be rotated and adjusted. It also contains a discharge regulator (e.g. fishtail, duckbill, flapper) below the spigot to increase efficiency and deliver a consistent underflow density, regardless of solids content variation in the feed. The extended overflow pipe induces a siphon effect which creates a vacuum on the cyclone discharge regulator, causing it to close and trap the majority of the water, silts and clays. The regulator forces a higher percentage of water, silts and clays to the overflow. When the weight of the solids inside the hydrocyclone regulator is sufficient to overcome the vacuum, the thick underflow product discharges from the regulator. The control of the material reporting to the underflow results in a much higher underflow density than otherwise obtainable. The Cavex® dewatering cyclone is best suited to tailings, desliming and dewatering applications.

المواصفات

TEMPERATURE RANGE	0-80°C
Brand line	Cavex®
Product type	Hydrocyclones
DESIGN	The Cavex® dewatering cyclone contains the original Cavex® laminar spiral inlet geometry design with a siphon assisted overflow pipe and a lipseal spigot arrangement. Cyclone discharge from the underflow must not be restricted during operation.
Catalogue category	Hydrocyclones
SIZE RANGE	150mm to 800mm diameter
PRESSURE CLASS	A maximum of 100kPa (14.5psi)
HOUSINGS	Metal or Dough Moulded Compound (DMC)
LINERS	Rubber or ceramic
DENSITY	A maximum of 25wt% solids