789 Next Generation
رقم القطعة: CAT-116180
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: CAT-116180
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
789 Next Generation
| Engine Model | Cat® 3516E |
|---|---|
| Gross Power - SAE J1995:2014 | 1566 kW |
| Net Power - SAE J1349:2011 | 1473 kW |
| Bore | 170 mm |
| Stroke | 215 mm |
| Displacement | 7.8 l |
| Note (1) | Consult your tire manufacturer for maximum tire load |
| Note (2) | Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires. |
| Note (3) | U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets. |
| Forward - 1 | 12.6 km/h |
| Forward - 2 | 17.1 km/h |
| Forward - 3 | 23.1 km/h |
| Forward - 4 | 31.2 km/h |
| Heaped (SAE 2:1) | 187 |
| Forward - 5 | 42.3 km/h |
| Struck | 77 m3(101 yd3) |
| Forward - 6 | 57.2 km/h |
| Air Conditioning | (HFC - 134A refrigerant) 24,500 Btu/hr |
| Fuel Tank | 4546 l |
| Cooling System | 679 l |
| Front Axle - Empty | 50% |
| Rear Axle - Empty | 50% |
| Model | 789 |
| Front Axle - Loaded | 33% |
| Product Page | https://www.cat.com/en_US/products/new/equipment/off-highway-trucks/mining-trucks/116180.html |
| Caterpillar Category | Mining Trucks |
| Rear Axle - Loaded | 67% |
| Caterpillar Category Path | Products > Equipment > Off-Highway Trucks > Mining Trucks > 789 |
| Caterpillar Product Family | equipment |
| Type | Double reduction, planetary with full floating axles |
| Caterpillar Product Page ID | 116180 |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20250306-3cf7e-c8a94 |
| Operating Width | 25.67 ft |
| Rated Speed | 1650 r/min |
| Ground Clearance | 4.25 ft |
| Engine — Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
| Engine — Note (2) | Optional 1417 kW / 1,900 HP engine rating. |
| Wheel Base | 18.67 ft |
| Parking Brake | Four-corner, Multi-disc, Spring applied, Hydraulically Released |
| Body Weight | 27 400 kg |
| Nominal Rated Payload | 193 t |
| Emissions Rating | Fuel Optimized |
| Rated Gross Machine Weight | 324 318 kg |
| Differential Ratio | 2.35:1 |
| Planetary Ratio | 10.83:1 |
| Top Speed - Loaded | 57.2 km/h |
| Pump Flow - High Idle | 403 L/min |
| Total Reduction Ratio | 25.46:1 |
| Optional Tires | 40 R57 |
| Relief Valve Setting - Raise | 18 950 kPa |
| Body Raise Time - High Idle | 14 s |
| Optional Tire | 42/90 R57 |
| Standard Tires | 37 R57 |
| Body Lower Time - Float | 16 s |
| Rims | 29” x 57” Rims |
| Fuel Tank (Tier 4) | 2500 l |
| Tires — Note (1) | Quick Change Rims optional |
| Suspension — Type | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments |
| Diesel Exhaust Fluid Tank | 233 l |
| Tires — Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
| Effective Cylinder Stroke - Front | 104.65 mm |
| Crankcase | 291 l |
| Service Brakes | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
| Effective Cylinder Stroke - Rear | 93.22 mm |
| Front Wheels - Each | 22 l |
| Front Wet Disc Brake Surface Area | 81 693 cm² |
| Rear axle - Oscillation | +/- 5 degrees |
| Rear - Wet Disc Brake Surface Area | 134 590 cm² |
| Differentials | 610 l |
| Steer Angle | 36.07 ° |
| Standards | (Service and Secondary) ISO 3450:2011 |
| Steering Standards | ISO 5010:2019 |
| Body Hoists — Type | Twin, two-stage hydraulic cylinders with snubbing valve. |
| Steering System - Includes Tank | 175 l |
| Brake Hoist System - Includes Tank | 1315 l |
| Torque Converter - Transmission System - Including Sump | 209 l |
| Heater / Defroster | 33 300 Btu/h |
| Brake Hoist System | 640 l |
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. |
| Reverse | 11.8 km/h |
| Capacity - HP Body - 100% Fill Factor — Note (1) | Consult your local Cat dealer for body recommendations |
| Height - Top of ROPS | 18.25 ft |
| Fuel Tank - Standard | 2500 l |
| ROPS Standards (2) | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. |
| Overall Body Length | 42.5 ft |
| Steering System | 160 l |
| Inside Body Length | 28.67 ft |
| Sound Standards (1) | Operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008. |
| Overall Length | 42.58 ft |
| Rear Axle - Tail | 12.67 ft |
| Inside Body Depth - Maximum | 10.08 ft |
| Dump Clearance | 5.17 ft |
| Overall Height - Body Raised | 37.83 ft |
| Loading Height - Empty | 20.17 ft |
| Rear Sidewall Height | 3.33 ft |
| Centerline Front Tire Width | 17.75 ft |
| Engine Guard Clearance | 4.25 ft |
| Overall Canopy Width | 25.5 ft |
| Outside Body Width | 23.33 ft |
| Inside Body Width | 22.67 ft |
| Centerline of Rear Dual Tire Width | 15.42 ft |
| Front Canopy Height | 22.08 ft |
| Overall Tire Width | 23.33 ft |
| Rear Axle - Clearance | 4.17 ft |

Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر
Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر

Caterpillar
اطلب عرض سعر
Caterpillar
اطلب عرض سعر