Caterpillar

796 AC Electric Drive Mining Truck

Name: 796 AC Electric Drive Mining Truck
Brand: Caterpillar
SKU: CAT-15970072

رقم القطعة: CAT-15970072

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

796 AC Electric Drive Mining Truck

المواصفات

Engine Model	Cat® C175-16
Bore	175 mm
Stroke	220 mm
Displacement	85 l
Note (1)	Consult your tire manufacturer for maximum tire load.
Note (2)	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)	Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations
Heaped (SAE 2:1)	186-237 m³ (243-310 yd³)
Struck	97-153 m³ (127-200 yd³)
Air Conditioning	HFC - 134A refrigerant: 21,600 Btu/h
Note	Turning Diameter (ISO 7457:1997)
Fuel Tank	4922 l
Cooling System	799 l
Front Axle - Empty	47 %
Rear Axle - Empty	53 %
Final Drive - Each	254 l
Model	796 AC
Front Axle - Loaded	33 %
Product Page	https://www.cat.com/en_US/products/new/equipment/off-highway-trucks/mining-trucks/15970072.html
Caterpillar Category	Mining Trucks
Rear Axle - Loaded	67 %
Caterpillar Category Path	Products > Equipment > Off-Highway Trucks > Mining Trucks > 796 AC
Caterpillar Product Family	equipment
Type	Twin, two-stage hydraulic cylinders with snubbing valve.
Caterpillar Product Page ID	15970072
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20190514-28833-50502
Controls	Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
Hydraulic Tank	1121 l
Rated Speed	1800 r/min
Hydraulic System - Including Tank	1458 l
Engine — Note (1)	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Engine — Note (2)	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Wheel Base	6674 mm
Gross Power - SAE J1995	2610 kW
Net Power - SAE J1349	2539 kW
Grease Tank	41 kg
Parking Brake	Four-corner, Multi-disc, Spring Applied, Hydraulically Released
Nominal Rated Payload	327 t
Emissions Rating	Fuel Optimized
Engine — Note (3)	Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
Rated Gross Machine Weight	576072 kg
Chassis Weight	203398 kg
Top Speed - Loaded	64 km/h
Pump Flow - High Idle	964 L/min
Total Reduction Ratio	35:01:00
Relief Valve Setting - Raise	20884 kPa
Body Raise Time - High Idle	21 s
Standard Tires	59/80 R63
Body Weight Range	38 833 – 42 907 kg (85,611 – 94,594 lb)
Body Lower Time - Float	22 s
Rims	44" x 63"
Fuel Tank (Tier 4)	4542 l
Body Power Down- High Idle	17.5 s
Tires — Note (1)	Quick Change Rims optional.
Suspension — Type	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Diesel Exhaust Fluid Tank	378 l
Tires — Note (2)	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Effective Cylinder Stroke - Front	102.1 ml
Crankcase	310 l
Generator/Alternator	Cat brushless, engine mounted, dual bearing
Service Brakes	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Effective Cylinder Stroke - Rear	50.5 mm
Front Wheels - Each	28 l
Wheel Motor	Cat AC induction, rear axle mounted
Front Wet Disc Brake Surface Area	131473 cm²
Rear axle - Oscillation	+/- 5.32 degrees
Service Refill Capacities — Note (1)	DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
Rear - Wet Disc Brake Surface Area	198388 cm²
Steer Angle	39 °
Standards	Service and Secondary: ISO 3450:2011
Steering Standards	ISO 5010:2019
Load Brake	Rear service brakes
Turning Diameter - Front	32.4 m
Dynamic Retarding Power - Continuous	4086 kW
AC Drive System — Cooling System	Cat variable speed, hydraulically driven cooling system
Braking System — Note	Anti-Lock Brake System (ABS) optional with CMD package
Weight Distributions - Approximate — Note	Weight distributions optimized with Cat body.
Capacity - HE Body - 100% fill factor — Note	Consult your local Cat dealer for body recommendations.
Heater / Defroster	24600 Btu/h
Body Hoists — Note (1)	Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
ROPS Standards (1)	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
Body Hoists — Note (2)	Power raise in both stages; power down capability in both stages.
FOPS Standards	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
Body Hoists — Note (3)	Automatic body-lower modulation reduces impact on frame.
Cab — Note	Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
Height - Top of ROPS	6720 mm
Sound Standards	The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.
Overall Length	15679 mm
Rear Axle - Tail	4898 mm
Overall Height - Body Raised	14890 mm
Dump Clearance - Empty	1744 mm
Loading Height - Empty	7271 mm
Centerline Front Tire Width	7028 mm
Front Axle Clearance - Loaded	855 mm
Front Canopy Height - Empty	7928 mm
Overall Canopy Width (with rock deflectors)	10103 mm
Outside Body/Canopy Width (without rock deflectors)	9639 mm
Inside Body Width	8973 mm
Centerline of Rear Dual Tire Width	5943 mm
Rear Axle Clearance - Loaded	854 mm
Overall Tire Width - Empty	9226 mm
Dimensions (Approximate) — Note	Dimensions listed includes canopy deflectors