785 Mining Truck (LRC, Tier 4 Final / EU Stage V)

Caterpillar

785 Mining Truck (LRC, Tier 4 Final / EU Stage V)

Name: 785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
Brand: Caterpillar
SKU: CAT-104480

رقم القطعة: CAT-104480

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

785 Mining Truck (LRC, Tier 4 Final / EU Stage V)

المواصفات

Engine Model	Cat 3512E
Bore	170 mm
Stroke	215 mm
Displacement	58.56 l
Note (1)	Consult your tire manufacturer for maximum tire load
Note (2)	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)	Unlined HP Body. Body weight varies depending on body selection and configuration.
Forward - 1	12 km/h
Forward - 2	16.2 km/h
Forward - 3	22.1 km/h
Forward - 4	29.8 km/h
Heaped (SAE 2:1)	110 m3 / 144 yd3
Forward - 5	40.2 km/h
Struck	84 m3 / 110 yd3
Forward - 6	57.2 km/h
Air Conditioning	HFC - 134A refrigerant: 24,500 Btu/h
Note	Weight distributions optimized with Cat body.
Fuel Tank	1552 l
Cooling System	476 l
Front Axle - Empty	48%
Rear Axle - Empty	52%
Model	785
Front Axle - Loaded	33%
Product Page	https://www.cat.com/en_US/products/new/equipment/off-highway-trucks/mining-trucks/104480.html
Caterpillar Category	Mining Trucks
Rear Axle - Loaded	67%
Caterpillar Category Path	Products > Equipment > Off-Highway Trucks > Mining Trucks > 785
Caterpillar Product Family	equipment
Type	Double reduction, planetary with full floating axles.
Caterpillar Product Page ID	104480
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20240611-1bb85-05fe3
Operating Width	7535 mm
Transmission — Note	Maximum travel speeds with standard 33.00-R51 tires.
Ground Clearance	1004 mm
Engine — Note (1)	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Engine — Note (2)	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Wheel Base	5180 mm
Gross Power - SAE J1995	1193 kW
Net Power - SAE J1349	1125 kW
Parking Brake	Four corner, multi disc, spring applied, hydraulically released
Nominal Rated Payload (36.00R51 Tires)	147 t
Rated Gross Machine Weight (36.00R51 tires)	255826 kg
Nominal Rated Payload (33.00R51 Tires)	143 t
Rated Gross Machine Weight (33.00R51 tires)	249476 kg
Chassis Weight (33.00R51 Tires)	85156 kg
Chassis Weight (36.00R51 Tires)	87525 kg
Body Weight	26208 kg
Emissions Rating	Fuel Optimized
Engine — Note (3)	Additional fuel optimized selectable power ratings: 1,450 hp
Differential Ratio	2:10:01
Planetary Ratio	10.83:1
Top Speed - Loaded	57.2 km/h
Pump Flow - High Idle	847 L/min
Total Reduction Ratio	22.75:1
Optional Tires	33.00R51
Relief Valve Setting - Raise	17225 kPa
Body Raise Time - High Idle	15 s
Optional Tire	36.00R51
Body Lower Time - Float	15.6 s
Rims	610 mm (24") Rims (optional). 660 mm (26") Rims (optional).
Body Power Down- High Idle	15.5 s
Tires — Note (1)	Quick Change Rims optional.
Suspension — Type	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Diesel Exhaust Fluid Tank	136 l
Tires — Note (2)	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Effective Cylinder Stroke - Front	320 mm
Crankcase	204 l
Service Brakes	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Effective Cylinder Stroke - Rear	165 mm
Front Wheels - Each	27 l
Front Wet Disc Brake Surface Area	61270 cm²
Rear axle - Oscillation	+/- 5.4 degrees
Rear - Wet Disc Brake Surface Area	89728 cm²
Steer Angle	25.1 °
Standards	Service and Secondary: ISO 3450:2011
Steering Standards	ISO 5010:2019
Steering Tank	110 l
Body Hoists — Type	Twin, two-stage hydraulic cylinders with snubbing valve.
Differential - Final Drives	527 l
Brake/Hoist Tank	511 l
Steering System - Includes Tank	117 l
Brake Hoist System - Includes Tank	541 l
Torque Converter - Transmission System - Including Sump	175 l
Heater / Defroster	33300 Btu/h
ROPS Standards (1)	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
FOPS Standards	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
Reverse	11.6 km/h
Turning Diameter - ISO 7457:1997 (33.00R51 tires)	29.4 m
Height - Top of ROPS	5208 mm
Overall Body Length	11985 mm
Inside Body Length	8318 mm
Sound Standards	The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008.
Overall Length	11957 mm
Rear Axle - Tail	3829 mm
Inside Body Depth - Maximum	2790 mm
Dump Clearance	1128 mm
Overall Height - Body Raised	12032 mm
Loading Height - Empty	5299 mm
Centerline Front Tire Width	4850 mm
Engine Guard Clearance	1038 mm
Overall Canopy Width	7562 mm
Outside Body Width	6714 mm
Inside Body Width	6010 mm
Centerline of Rear Dual Tire Width	4285 mm
Front Canopy Height	6035 mm
Overall Tire Width	6277 mm
Rear Axle - Clearance	990 mm