Caterpillar

794 AC Mining Truck

Name: 794 AC Mining Truck
Brand: Caterpillar
SKU: CAT-1000021630

رقم القطعة: CAT-1000021630

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

794 AC Mining Truck

المواصفات

Engine Model	Cat® C175-16
Note (1)	Consult your tire manufacturer for maximum tire load.
Note (2)	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires
Note (3)	Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations.
Note (4)	Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg)
Heaped (SAE 2:1)	180-222 m³ (236-290 yd³)
Struck	108-133 m³ (142-175 yd³)
Note	Contact your local Cat dealer for body recommendations.
Fuel Tank	4922 l
Cooling System	Variable speed, hydraulically driven cooling system
Front Axle - Empty	49 %
Rear Axle - Empty	51 %
Final Drive - Each	254 l
Model	794 AC
Front Axle - Loaded	33 %
Product Page	https://www.cat.com/en_US/products/new/equipment/off-highway-trucks/mining-trucks/1000021630.html
Caterpillar Category	Mining Trucks
Rear Axle - Loaded	67 %
Caterpillar Category Path	Products > Equipment > Off-Highway Trucks > Mining Trucks > 794 AC
Caterpillar Product Family	equipment
Caterpillar Product Page ID	1000021630
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20240223-14f9f-1fef7
Controls	IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
Steering — Note	Gross Machine Operating Weight is 521 631 kg (1,150,000 lb).
Hydraulic Tank	1121 l
Rated Speed	1800 r/min
Ground Clearance	906 mm
Hydraulic System - Including Tank	1458 l
Engine — Note (1)	Contact factory for high altitude configuration.
Engine — Note (2)	Tier 4 / EU Stage V option available for regions that require these emissions standards.
Wheel Base	6644.5 mm
Gross Power - SAE J1995	2610 kW
Net Power - SAE J1349	2539 kW
Parking Brake	Four-corner, Multi-disc, Spring applied, Hydraulically Released
Body Weight	29187 kg
Nominal Rated Payload	297 t
Emissions Rating	Fuel Optimized
Engine — Note (3)	Tier 4 / EU Stage V engine option Net Power - SAE J1349: 3434 HP (2561 kW)
Rated Gross Machine Weight	521631 kg
Chassis Weight	193338 kg
Standard Gross Power - SAE J1995	2610 kW
Top Speed - Loaded	60 km/h
Optional Gross Power - SAE J1995	2312 kW
Total Reduction Ratio	35:01:00
Relief Valve Setting - Raise	20884 kPa
Optional Gross Power - SAE J1995 (Option 2)	2051 kW
Body Raise Time - High Idle	24 s
Standard Tires	53/80 R63
Rims	36" x 63"
Tires — Note (1)	Quick Change Rims optional.
Diesel Exhaust Fluid Tank	378 l
Tires — Note (2)	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Crankcase	310 l
Generator/Alternator	Brushless, engine mounted, dual bearing
Service Brakes	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Wheel Motor	High-torque AC induction, rear axle mounted
Front Wet Disc Brake Surface Area	131473 cm²
Service Refill Capacities — Note (1)	DEF Tank only available for EPA Tier 4 / EU Stage V engine option.
Rear - Wet Disc Brake Surface Area	198388 cm²
Steer Angle	39 °
Standards	ISO 3450:2011
Service Refill Capacities — Cooling System	799 l
Steering Standards	ISO 5010:2019
Load Brake	Rear service brakes
Dynamic Retarding Power - Continuous	4086 kW
Pump Flow - High Idle (HAA at 1,800 rpm)	840 L/min
Pump Flow - High Idle (LAA at 1,960 rpm)	910 L/min
High Idle Body Lower Time - Float	20 s
Total Cycle Time	44 s
Body Hoists — Note (1)	Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in both stages.
ROPS Standards (1)	Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer.
Body Hoists — Note (2)	Power raise in both stages; power down in both stages possible.
FOPS Standards	Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer.
Body Hoists — Note (3)	Automatic body-lower modulation reduces impact on frame.
Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate	16 mm
Height - Top of ROPS	6779 mm
Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate	9 mm
Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate	8 mm
Sound Standards (1)	The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed.
Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate	5 mm
Overall Length	15463.5 mm
Rear Axle - Tail	4716 mm
Dump Clearance	1555 mm
Overall Height - Body Raised	14747 mm
Loading Height - Empty	6995 mm
Centerline Front Tire Width	7024 mm
Front Axle Clearance	969 mm
Overall Canopy Width	9611 mm
Canopy Width (without optional rock deflectors)	9068 mm
Outside Body Width	9062 mm
Inside Body Width	8560 mm
Centerline of Rear Dual Tire Width	5727 mm
Front Canopy Height	8024 mm
Overall Tire Width	8738 mm
Rear Axle - Clearance	934 mm
Sound Standards (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.