Komatsu

HD605-10

رقم القطعة: KOMATSU-HD605-10

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

HD605-10

المواصفات

Maximum torque (ft-lbs)3,016 @ 1,400 rpm
Operating weight (kg)114 400
Operating weight (lbs)252,209
Engine modelKomatsu SAA6D170E-7 (EPA Tier 4 Final emissions certified)
AspirationVariable geometry, turbo-charged, air-to-air after-cooled, cooled Exhaust Gas Recirculation (EGR)
Number of cylinders6
Piston displacement (L)23.15
Piston displacement (in^3)1,413
GovernorElectronically controlled
SAEJ1995 - Gross (kW)610 @ 2,000 rpm
SAEJ1995 - Gross (HP)818 @ 2,000 rpm
ISO 9249 / SAE J1349 - Net (HP)791 @ 2,000 rpm (590 @ 2,000 rpm)
FilterFull-flow type
MethodGear pump, force-lubrication
Fuel tank (US gal)800
Fuel tank (L)211.3
Engine oil (L)80
Engine oil (US gal)21.1
Final drive (US gal)11.1
Final drive (L)42
Bore (mm)170 x 170
Bore (in)6.69 x 6.69
Hydraulic system (US gal)39.4
Hydraulic system (L)149
Air cleanerDry type with double elements and pre-cleaner (cyclone pack type), and evacuator valve
Maximum travel speed (kph)70
Maximum travel speed (mph)43.4
Engine typeWater-cooled, four-cycle
Parking brake typeOil cooled, multiple disc type, spring operated, hydraulic releasing type
TransmissionFull-automatic, planetary type
Gross vehicle weight (kg)114 400
Gross vehicle weight (lbs)252,209
Gross horsepower (HP)818 HP @ 2,000 rpm
Gross horsepower (kW)610 kW @ 2 000 rpm
Capacity (mt)64.1
Capacity (st)70.7
Maximum torque (kg-m)417 @ 1,400 rpm
Front suspension typeIndependent, hydro-pneumatic suspension cylinder with fixed throttle to dampen vibration
Hoist cylinder typeTwin, two-stage telescopic type
Fuel systemDirect injection
Relief pressure (kg/cm^2 / MPa)210 / 20.6
Relief pressure (psi)2,990
Hoist time11.5
Torque converterThree-elements, one-stage, two-phase
Speed rangeSeven speeds forward and one reverse
Lockup clutchLockup clutch
ForwardTorque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Shift controlElectronic shift control with automatic clutch modulation in all gears
Brakes standardISO 3450
ReverseTorque converter drive
Final drive typePlanetary gear
Differential ratio3.538
Planetary ratio4.737
Steering system typeFull-hydraulic power steering with two double-acting cylinders.
Supplementary steeringManually controlled (meets ISO 5010)
Minimum turning radius wall to wall (ft)28 ft. 7 in
Minimum turning radius wall to wall (m)8.7
Empty weight (lbs)113,803 (including 176 lbs operator)
Empty weight (kg)50,300 (including 80 kg operator)
Front axle - loaded (%)32.3
Rear axles - loaded (%)67.7
Front axle - empty (%)54
Rear axles - empty (%)46
Torque converter transmission retarder (L)215
Torque converter transmission retarder (US gal)56.8
Differentials (L)95
Differentials (US gal)25.1
Suspension (US gal)17.5
Suspension (L)66.2
Articulated typeBox-sectioned structure
Standard tire24.00 R35
Struck capacity (2 : 1) unlined (standard) (m^3)32.3
Struck capacity (2 : 1) unlined (standard) (yd^3)42.2
Heaped capacity (2 : 1) unlined (standard) (yd^3)56.2
Struck capacity (2 : 1) lined (m^3)31.4
Heaped capacity (2 : 1) lined (m^3)42.2
Heaped capacity (2 : 1) unlined (standard) (m^3)43
Heaped capacity (2 : 1) lined (yd^3)55.2
Struck capacity (2 : 1) lined (yd^3)41.1
Side lined (standard) (in)0.35
Front unlined (standard) (mm)9
Mechanical stopper (degrees)7.7
Front lined (standard) (in)0.35
Oil stopper (degrees)6.8
Bottom unlined (standard) (in)0.63
Bottom lined (standard) (mm)16
Bottom unlined (standard) (mm)16
Body footnote*Payload may vary depending on the machine and body configuration. Please contact distributor for details regarding your specific configuration.
RetarderOil cooled, multiple disc type full hydraulic
Front lined (standard) (mm)9
Front unlined (standard) (in)0.35
Side lined (standard) (mm)9
Bottom lined (standard) (in)0.63
Max. gross vehicle weight (120 %) lined (kg)126400
Maximum steering angle (degrees)39
Rear axleFull-floating
Nominal payload* lined (kg)59900
Nominal payload* unlined (standard) (lbs)141316
Gross vehicle weight lined (kg)114400
Front distribution (loaded) *nominal lined (%)33.5
Empty weight unlined (standard) (kg)50300
Side unlined (standard) (mm)9
Rear distribution (loaded) *nominal unlined (standard) (%)66.4
Front suspension (mm)303
Side unlined (standard) (in)0.35
Nominal payload* unlined (standard) (kg)64100
Front suspension (ft X in)11.9
Rear distribution (loaded) *nominal lined (%)66.5
Gross vehicle weight lined (lbs)252209
Nominal payload* lined (lbs)132057
Empty weight lined (lbs)120152
Front brake typeDry type, single disc type full hydraulic
Gross vehicle weight unlined (standard) (lbs)252209
Gross vehicle weight unlined (standard) (kg)114400
Max. gross vehicle weight (120 %) unlined (standard) (lbs)280428
Maximum payload (120 %) unlined (standard) (lbs)169579
Max. gross vehicle weight (120 %) unlined (standard) (kg)127200
Rear distribution (empty) lined (%)48.9
Maximum payload (120 %) unlined (standard) (kg)76900
Maximum payload (120 %) lined (kg)71900
Empty weight lined (kg)54500
Front distribution (empty) unlined (standard) (%)54.2
Empty weight unlined (standard) (lbs)110893
Rear distribution (empty) unlined (standard) (%)45.8
Front distribution (loaded) *nominal unlined (standard) (%)33.6
Front distribution (empty) lined (%)51.1
Maximum payload (120 %) lined (lbs)158468
Max. gross vehicle weight (120 %) lined (lbs)278664
Rear brake typeOil cooled, multiple disc type full hydraulic

منتجات مشابهة

معدات ثقيلة وآليات