Warman® SP/SPR Vertical Centrifugal Sump Pumps

Weir

Warman® SP/SPR Vertical Centrifugal Sump Pumps

Name: Warman® SP/SPR Vertical Centrifugal Sump Pumps
Brand: Weir

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Able to process particle sizes up to 65mm and a wide spectrum of slurry types, Warman® SP and SPR centrifugal sump pumps are frequently used for minerals processing, coal preparation, effluent handling, sand and gravel applications and chemical processing (Service Class 1-3). These vertical sump pumps , are efficient and reliable in almost any tank, pit, sump or ground slurry application. They are also renowned for their performance as fly ash or sugar beet pumps. For very deep sumps, or where high shaft speeds limit the length of the pump, our Warman® SP and SPR pumps can be installed with a suction extension pipe at the bottom inlet to extend the depth of the pump by up to two metres. Compared to other vertical sump pumps, Warman® SP and SPR centrifugal sump pumps offer the following benefits: Superior versatility - available in metal (Warman® SP) or rubber-lined (Warman® SPR) versions to suit most pumping applications Can be paired with a Warman® WBV® anti-bogging sump pump to create an ultra heavy-duty hybrid pump and improve performance Pumping is maintained even when the top inlet is not submerged, thus enabling the level of liquid to be lowered right down to the bottom inlet or the bottom of any suction extension pipe These vertical pumps are available with standard open impeller and recessed impeller options Zero ancillary water costs No priming required Reduced risk of blockages For more information about Warman® centrifugal sump pumps, please get in touch with our team.

المواصفات

TEMPERATURE RANGE	From 1 to 90°C
CAPACITY	Capacities up to 3522 gpm (800 m3/hr)
Brand line	Warman®
Product type	Pumps, Sump Pumps, Vertical Pumps, Vertical Slurry Pumps
Catalogue category	Vertical Slurry Pumps, Vertical Sump Pumps, Pumps
SIZE RANGE	Discharge sizes: From 40mm to 200mm (1.5" to 8")
PRESSURE CLASS	Heads to 110ft (34m) \| Pressures to 109 psi (750 kPa)
MATERIAL	Warman® SP/SPR centrifugal sump pumps are offered with various combinations of metal and rubber wet end components to suit various applications. Some metals available include our proprietary Ultrachrome® A05 white iron, C23 stainless steel cast alloy and W151 erosion/corrosion resistant white iron. Examples of elastomer options include our R55® rubber, nitrile rubber, butyl rubber and EPDM.
DESIGN STANDARDS	Hydraulic Institute 9.6.2, ISO 9001, OHSAS 18001